5889W2A014C LG Turntable Assembly

DIY Instructions for Replacing the 5889W2A014C LG Microwave Oven Turntable Tray Support / Rotating Ring Assy

Replacing the rotating ring assembly in your LG microwave oven is a fairly simple DIY task. By following these instructions, you can easily replace the 5889W2A014C rotating ring assembly and ensure that your microwave works properly.

Tools Needed:

-Phillips screwdriver

-Flathead screwdriver

Instructions:

1. Unplug your LG microwave oven to ensure your safety.

2. Remove the panel at the top of the microwave oven. Use a Phillips screwdriver to unscrew the screws holding the panel in place.

3. Carefully remove the turntable tray from the oven.

4. Locate the old rotating ring assembly, which can be found attached beneath the tray.

5. Use a flathead screwdriver to remove the screws holding the old rotating ring assembly in place.

6. Place the new 5889W2A014C LG rotating ring assembly into place, making sure to attach it securely with the screws.

7. Reinstall the turntable tray into the oven and make sure that it is spinning freely.

8. Replace the panel at the top of the microwave oven, screwing it in place with the Phillips screwdriver.

9. Plug in your LG microwave oven and test the rotating ring assembly to make sure it’s working properly.

Congratulations! You have successfully replaced the 5889W2A014C rotating ring assembly in your LG microwave oven.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.