5300JK1005D LG Refrigerator Freezer Defrost Heater
Part #: LGE 5300JK1005D
LG Electronics Sears Kenmore Refrigerator Freezer DEFROST HEATER 5300JK1005D
We are a Factory Authorized Distributor for LG Electronics appliance parts. Trust us for all of your LG Electronics appliance parts and accessories needs.
We are a Factory Authorized Distributor for LG Electronics appliance parts. Trust us for all of your LG Electronics appliance parts and accessories needs.
Weight : 1.8863 lbs
Dimension : 7.2 x 26.75 x 1.9
LG Electronics Sears Kenmore Refrigerator Freezer DEFROST HEATER 5300JK1005D
We are a Factory Authorized Distributor for LG Electronics appliance parts. Trust us for all of your LG Electronics appliance parts and accessories needs.
We are a Factory Authorized Distributor for LG Electronics appliance parts. Trust us for all of your LG Electronics appliance parts and accessories needs.
Weight : 1.8863 lbs
Dimension : 7.2 x 26.75 x 1.9
Write Your Own Review
DIY Guide to Replacing the LG Refrigerator Freezer DEFROST HEATER (Model # 5300JK1005D)
Safety Warning: Before beginning any DIY repairs, make sure that the power source to the refrigerator is cut off to avoid electrocution.
What You’ll Need:
-Replacement LG Refrigerator Freezer DEFROST HEATER (Model #5300JK1005D)
-Screwdriver
-Rags
-Wire cutters
Step 1: Now, let’s start by removing the screws that secure the back panel inside the freezer compartment.
Step 2: Remove the screws that are securing the DEFROST HEATER to the evaporator coil. Use a wire cutter to cut the wires and disconnect the heater.
Step 3: Take out the old DEFROST HEATER, and wipe down the area where the new one will be installed.
Step 4: Position the new DEFROST HEATER and secure it with the screws.
Step 5: Connect the wires to the new heater, and then replace the backing panel, securing it again with the screws.
Step 6: Turn on the power source to the refrigerator and turn off the defrost setting. Your freezer should now be functioning optimally.
And there you have it! You have successfully replaced the LG Refrigerator Freezer DEFROST HEATER (Model #5300JK1005D).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Safety Warning: Before beginning any DIY repairs, make sure that the power source to the refrigerator is cut off to avoid electrocution.
What You’ll Need:
-Replacement LG Refrigerator Freezer DEFROST HEATER (Model #5300JK1005D)
-Screwdriver
-Rags
-Wire cutters
Step 1: Now, let’s start by removing the screws that secure the back panel inside the freezer compartment.
Step 2: Remove the screws that are securing the DEFROST HEATER to the evaporator coil. Use a wire cutter to cut the wires and disconnect the heater.
Step 3: Take out the old DEFROST HEATER, and wipe down the area where the new one will be installed.
Step 4: Position the new DEFROST HEATER and secure it with the screws.
Step 5: Connect the wires to the new heater, and then replace the backing panel, securing it again with the screws.
Step 6: Turn on the power source to the refrigerator and turn off the defrost setting. Your freezer should now be functioning optimally.
And there you have it! You have successfully replaced the LG Refrigerator Freezer DEFROST HEATER (Model #5300JK1005D).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.