5001DD4001A LG Dishwasher Mounting Bracket Kit

DIY Guide: How to Replace an LG 5001DD4001A Dishwasher Mounting Bracket Kit

Replacing the mounting bracket kit of your LG dishwasher is an easy job that you can do yourself with the right tools and instructions. This short guide will help you replace your LG 5001DD4001A dishwasher mounting bracket kit in no time.

Tools You Will Need

- Phillips screwdriver
- Flathead screwdriver
- Wrench (optional)

Instructions

1. Unplug your dishwasher from the power source.
2. Open the dishwasher door and locate the screws securing the mounting bracket to the cabinet.
3. Remove the screws using a Phillips screwdriver.
4. Lift the mounting bracket away from the cabinet and set aside.
5. Place the new mounting bracket in place, aligning the pre-drilled holes with the cabinet.
6. Secure the bracket to the cabinet using the screws provided in the kit.
7. Tighten the screws with a Phillips screwdriver.
8. Plug your dishwasher back into the power source.
9. Test the new mounting bracket by running the dishwasher.

Congratulations! You have successfully replaced the LG 5001DD4001A dishwasher mounting bracket kit.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.