4681EA1007A LG Washer Drain AC Motor Pump Assembly
AC Drain Pump Motor Assembly for some models of LG Washing Machines.
Weight : 0.9567 lbs
Dimension : 4.9 x 6.95 x 5.45
AC Drain Pump Motor Assembly for some models of LG Washing Machines.
Weight : 0.9567 lbs
Dimension : 4.9 x 6.95 x 5.45
Write Your Own Review
DIY Instructions for Replacing the 4681EA1007A LG Washer Drain, AC Pump Motor Assembly
Replacing the AC pump motor assembly in your LG washer drain requires careful attention to detail and safety practices. Follow these steps to successfully replace the 4681EA1007A AC pump motor assembly:
1. Unplug your LG washer from the power outlet and shut off the water supply to the washing machine.
2. Position the washer away from the wall to give you adequate space to access the back panel of the washer.
3. Remove the back panel by unscrewing the screws that secure it in place.
4. Locate the AC pump motor assembly and disconnect the power supply by unplugging the cord.
5. Disconnect all wires and hoses connected to the AC pump motor assembly.
6. Remove the AC pump motor assembly by unscrewing the mounting screws.
7. Install the new 4681EA1007A AC pump motor assembly by carefully aligning the screws with the holes.
8. Reconnect all the wires and hoses to the new AC pump motor assembly.
9. Connect the power supply to the replacement AC pump motor assembly.
10. Position the back panel of the washer back in its place and screw it tight.
11. Turn on the water supply to the washer and plug the washer into the power outlet.
Your LG washer is now ready for use. Ensure to follow safety precautions and wear protective gear while working with electrical components.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the AC pump motor assembly in your LG washer drain requires careful attention to detail and safety practices. Follow these steps to successfully replace the 4681EA1007A AC pump motor assembly:
1. Unplug your LG washer from the power outlet and shut off the water supply to the washing machine.
2. Position the washer away from the wall to give you adequate space to access the back panel of the washer.
3. Remove the back panel by unscrewing the screws that secure it in place.
4. Locate the AC pump motor assembly and disconnect the power supply by unplugging the cord.
5. Disconnect all wires and hoses connected to the AC pump motor assembly.
6. Remove the AC pump motor assembly by unscrewing the mounting screws.
7. Install the new 4681EA1007A AC pump motor assembly by carefully aligning the screws with the holes.
8. Reconnect all the wires and hoses to the new AC pump motor assembly.
9. Connect the power supply to the replacement AC pump motor assembly.
10. Position the back panel of the washer back in its place and screw it tight.
11. Turn on the water supply to the washer and plug the washer into the power outlet.
Your LG washer is now ready for use. Ensure to follow safety precautions and wear protective gear while working with electrical components.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
