WR32X26246 GE Refrigerator Middle Pan Cover
WR32X26246 GE Refrigerator Middle Pan Cover
Weight : 8.173000 lbs
Dimension : 18.700700 x 3.031400 x 20.039300
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
WR32X26246 GE Refrigerator Middle Pan Cover
Weight : 8.173000 lbs
Dimension : 18.700700 x 3.031400 x 20.039300
Write Your Own Review
The following parts are replaced by this product
- WR32X10184
- WR32X10151
DIY: Replacing the Middle Pan Cover on your GE Refrigerator WR32X26246
A DIY refrigerator repair can be an easy and cost-effective way to keep your fridge running in good condition. Here are step-by-step instructions for replacing the middle pan cover on a GE WR32X26246 refrigerator.
Materials Needed:
• WR32X26246 Middle Pan Cover
• Philips Screwdriver
• Corrugated Cardboard
Instructions
1. Unplug the front of your GE WR32X26246 refrigerator from the power outlet and slide it out from the wall.
2. Locate the three screws that secure the middle pan cover to the back wall of the refrigerator.
3. Using a Philips screwdriver, remove the three screws and set them aside.
4. Carefully pull the middle pan cover away from the refrigerator wall.
5. Place a piece of corrugated cardboard on the floor directly underneath the refrigerator wall. This will provide support, so you don't damage the wall when removing the old pan cover.
6. With both hands, carefully lower the pan cover onto the cardboard and set it aside.
7. Take the new WR32X26246 Middle Pan Cover and place it in the empty slot where the old pan was removed.
8. Using the Phillips screwdriver, secure the three screws to the new middle pan cover and tighten them into place.
9. Slide the refrigerator back into its original position and plug it back into the power outlet.
10. Turn the refrigerator on and check that the middle pan cover is securely in place.
Congratulations! You have successfully replaced the middle pan cover on your GE WR32X26246 refrigerator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
A DIY refrigerator repair can be an easy and cost-effective way to keep your fridge running in good condition. Here are step-by-step instructions for replacing the middle pan cover on a GE WR32X26246 refrigerator.
Materials Needed:
• WR32X26246 Middle Pan Cover
• Philips Screwdriver
• Corrugated Cardboard
Instructions
1. Unplug the front of your GE WR32X26246 refrigerator from the power outlet and slide it out from the wall.
2. Locate the three screws that secure the middle pan cover to the back wall of the refrigerator.
3. Using a Philips screwdriver, remove the three screws and set them aside.
4. Carefully pull the middle pan cover away from the refrigerator wall.
5. Place a piece of corrugated cardboard on the floor directly underneath the refrigerator wall. This will provide support, so you don't damage the wall when removing the old pan cover.
6. With both hands, carefully lower the pan cover onto the cardboard and set it aside.
7. Take the new WR32X26246 Middle Pan Cover and place it in the empty slot where the old pan was removed.
8. Using the Phillips screwdriver, secure the three screws to the new middle pan cover and tighten them into place.
9. Slide the refrigerator back into its original position and plug it back into the power outlet.
10. Turn the refrigerator on and check that the middle pan cover is securely in place.
Congratulations! You have successfully replaced the middle pan cover on your GE WR32X26246 refrigerator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
