WR32X10479 GE Refrigerator Pan Veg Humidity
WR32X10479 GE Refrigerator Pan Veg Humidity
Weight : 14.508900 lbs
Dimension : 15.200000 x 12.400000 x 10.700000
WR32X10479 GE Refrigerator Pan Veg Humidity
Weight : 14.508900 lbs
Dimension : 15.200000 x 12.400000 x 10.700000
Write Your Own Review
DIY Guide to Replacing GE Refrigerator Pan Veg Humidity WR32X10479
Replacing the veg humidity pan on your GE refrigerator is an easy DIY job that requires just a few simple steps. Here’s what you’ll need:
1. A replacement veg humidity pan—the WR32X10479
2. Flathead and Philips head screwdrivers
3. Pliers
Instructions
1. Unplug the fridge and locate the veg pan. The veg pan is located in the bottom right corner of your refrigerator, near the back.
2. Remove the screws holding the veg pan in place with a flathead or Philips head screwdriver, depending on the type of screws you have. You may need a pair of pliers to turn the screwdriver if it is too tight.
3. Pull the pan out, being careful not to damage the surrounding components.
4. Insert the new veg pan in its place and secure it with the screws. Make sure the pan is properly aligned, as this will ensure that the humidity inside the pan is regulated.
5. Plug in your fridge and you’re all set!
With just a few simple steps, you can easily replace the veg pan on your GE refrigerator. Enjoy your newly humidity-controlled veggies!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the veg humidity pan on your GE refrigerator is an easy DIY job that requires just a few simple steps. Here’s what you’ll need:
1. A replacement veg humidity pan—the WR32X10479
2. Flathead and Philips head screwdrivers
3. Pliers
Instructions
1. Unplug the fridge and locate the veg pan. The veg pan is located in the bottom right corner of your refrigerator, near the back.
2. Remove the screws holding the veg pan in place with a flathead or Philips head screwdriver, depending on the type of screws you have. You may need a pair of pliers to turn the screwdriver if it is too tight.
3. Pull the pan out, being careful not to damage the surrounding components.
4. Insert the new veg pan in its place and secure it with the screws. Make sure the pan is properly aligned, as this will ensure that the humidity inside the pan is regulated.
5. Plug in your fridge and you’re all set!
With just a few simple steps, you can easily replace the veg pan on your GE refrigerator. Enjoy your newly humidity-controlled veggies!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
