WR02X31104 GE Badge
Part #: GEN WR02X31104
The WR02X31104 GE BADGE Genuine OEM. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0288 lbs
Dimension : 4 x 4 x 0.25
The WR02X31104 GE BADGE Genuine OEM. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0288 lbs
Dimension : 4 x 4 x 0.25
Write Your Own Review
1. Unplug the appliance from the power source.
2. Remove the four screws that hold the control panel in place.
3. Carefully remove the control panel, ensuring not to damage any wires or components.
4. Disconnect the two ribbon cables attached to the back of the badge.
5. Remove the four screws that secure the WR02X31104 GE Badge.
6. Install the new badge by placing it in the same location and securing the four screws.
7. Connect the two ribbon cables to the back of the badge.
8. Align the control panel and screw it back in place.
9. Plug the appliance back into a power source and test the new badge.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the four screws that hold the control panel in place.
3. Carefully remove the control panel, ensuring not to damage any wires or components.
4. Disconnect the two ribbon cables attached to the back of the badge.
5. Remove the four screws that secure the WR02X31104 GE Badge.
6. Install the new badge by placing it in the same location and securing the four screws.
7. Connect the two ribbon cables to the back of the badge.
8. Align the control panel and screw it back in place.
9. Plug the appliance back into a power source and test the new badge.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.