WR02X11331 GE Refrigerator Grommet

Step 1: Power off the Fridge - Unplug the refrigerator from the power outlet.

Step 2: Pull Out The Fridge - Pull the fridge away from the wall, and carefully lay it on its back.

Step 3: Locate the GE WR02X11331 Grommet Evap Fan - Find the fan located at the lower right corner of the evaporator coils.

Step 4: Remove the Old Fan - Use a Phillips screwdriver to remove the three screws securing the fan to the coil box.

Step 5: Disconnect the Wires - Carefully disconnect the two wires that lead to the old fan.

Step 6: Install the New Fan - Connect the two wires onto the new fan. Make sure that the connection is secure.

Step 7: Secure the New Fan - Now, use the Phillips screwdriver to secure the new fan to the coil box.

Step 8: Test the New Fan - Plug the refrigerator into the power outlet, and turn on the power switch. Check that the new fan is working properly.

Step 9: Put the Fridge Back in Place - Carefully slide the fridge back into place.

You have successfully replaced the GE WR02X11331 Grommet Evap Fan!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.