WH49X20495 GE Washer Motor and Tub Shield Kit

1. Unplug the washing machine from the power source.

2. Move the washing machine away from the wall so you have enough space to work.

3. Remove the back panel from the washing machine by unscrewing the screws.

4. Locate the old motor and shield tub and carefully remove them from the washing machine with a Phillips head screwdriver.

5. Take the new motor and shield tub and place it in the spot where you removed the previous one.

6. Secure the new motor and shield tub in place with the screws you removed earlier.

7. Connect the wiring harnesses to the new motor and shield tub, making sure the wires are connected correctly.

8. Reattach the back panel to the washing machine and screw in the screws that you removed earlier.

9. Plug the washing machine back in and test the new motor and shield tub.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.