WH43X30957 GE Agitator Assembly
WH43X30957 GE Agitator Assembly
Weight : 48.461600 lbs
Dimension : 18.503900 x 18.346400 x 19.842500
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
WH43X30957 GE Agitator Assembly
Weight : 48.461600 lbs
Dimension : 18.503900 x 18.346400 x 19.842500
Write Your Own Review
The following parts are replaced by this product
- WH43X25304
- WH43X26845
1. Unplug power cord from the power outlet and remove any hoses attached.
Part number: WH43X30957
2. Place a bucket underneath the washing machine and unscrew the bolts located at the base of the unit to loosen the agitator.
3. Carefully lift agitator up and out of the washing machine.
4. Take the old agitator assembly off and locate the plastic part labeled “WH43X30957†(this is the agitator dog).
5. Remove the plastic part by loosening the screws that hold it in place.
6. Place the new agitator dog in its place and tighten the screws.
7. Reassemble the agitator assembly onto the washing machine.
8. Tighten the bolts to securely place the agitator in its place.
9. Plug the power cord into the power outlet, reattach any hoses, and close the washing machine lid.
10. Test to ensure the agitator is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Part number: WH43X30957
2. Place a bucket underneath the washing machine and unscrew the bolts located at the base of the unit to loosen the agitator.
3. Carefully lift agitator up and out of the washing machine.
4. Take the old agitator assembly off and locate the plastic part labeled “WH43X30957†(this is the agitator dog).
5. Remove the plastic part by loosening the screws that hold it in place.
6. Place the new agitator dog in its place and tighten the screws.
7. Reassemble the agitator assembly onto the washing machine.
8. Tighten the bolts to securely place the agitator in its place.
9. Plug the power cord into the power outlet, reattach any hoses, and close the washing machine lid.
10. Test to ensure the agitator is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
