WH16X27180 GE Washer Suspension Rod
Ensure your washer operates smoothly with this high-quality suspension rod designed specifically for various GE models, including Hotpoint, Haier, Monogram, and Café. This essential component helps maintain your machine's stability during the washing process by effectively absorbing shock and reducing vibrations. Engineered for durability and reliability, it enhances the overall performance of your washing machine, preventing excessive wear and tear over time.
Easy to install, this part is a perfect replacement for worn-out or damaged suspension rods, ensuring your appliance functions efficiently. Trust in the quality of GE to Maintain your laundry experience, providing both peace of mind and superior cleaning results. Maintain your washer's performance with this vital part today.
Weight : 3.496400 lbs
Dimension : 27.000000 x 10.000000 x 1.800000
Ensure your washer operates smoothly with this high-quality suspension rod designed specifically for various GE models, including Hotpoint, Haier, Monogram, and Café. This essential component helps maintain your machine's stability during the washing process by effectively absorbing shock and reducing vibrations. Engineered for durability and reliability, it enhances the overall performance of your washing machine, preventing excessive wear and tear over time.
Easy to install, this part is a perfect replacement for worn-out or damaged suspension rods, ensuring your appliance functions efficiently. Trust in the quality of GE to Maintain your laundry experience, providing both peace of mind and superior cleaning results. Maintain your washer's performance with this vital part today.
Weight : 3.496400 lbs
Dimension : 27.000000 x 10.000000 x 1.800000
Write Your Own Review
Replace Your GE WH16X27180 ROD ASSEMBLY 27"
Replacing the broken rod assembly in your GE WH16X27180 washing machine will quickly restore its performance. Follow these simple steps to replace it.
Tools Needed:
• Phillips head screwdriver
• Flat head screwdriver
• Pliers
Instructions:
1. Unplug your washing machine from the wall outlet and lay it on its back so you can access the bottom of the machine. Use the Phillips head screwdriver to unscrew the eight screws that hold the access panel in place. Pull the access panel away from the base of the machine and set it aside.
2. Locate the broken rod assembly. It is usually situated near the lower-right corner of the machine. Unscrew the four screws that attach it to the machine using the Phillips head screwdriver.
3. Disconnect the wiring harness to the rod assembly by carefully pulling it out of its slot.
4. Clean the area of any lint or debris that may have built up.
5. Take the new rod assembly and slide the wiring harness into its slot. Securely attach the rod assembly to the machine with the four screws.
6. Replace the access panel and secure it with the eight screws.
7. Plug the washing machine into the wall outlet and turn it on to test if the rod assembly is working correctly.
Congratulations, you've successfully replaced your GE WH16X27180 ROD ASSEMBLY 27"!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the broken rod assembly in your GE WH16X27180 washing machine will quickly restore its performance. Follow these simple steps to replace it.
Tools Needed:
• Phillips head screwdriver
• Flat head screwdriver
• Pliers
Instructions:
1. Unplug your washing machine from the wall outlet and lay it on its back so you can access the bottom of the machine. Use the Phillips head screwdriver to unscrew the eight screws that hold the access panel in place. Pull the access panel away from the base of the machine and set it aside.
2. Locate the broken rod assembly. It is usually situated near the lower-right corner of the machine. Unscrew the four screws that attach it to the machine using the Phillips head screwdriver.
3. Disconnect the wiring harness to the rod assembly by carefully pulling it out of its slot.
4. Clean the area of any lint or debris that may have built up.
5. Take the new rod assembly and slide the wiring harness into its slot. Securely attach the rod assembly to the machine with the four screws.
6. Replace the access panel and secure it with the eight screws.
7. Plug the washing machine into the wall outlet and turn it on to test if the rod assembly is working correctly.
Congratulations, you've successfully replaced your GE WH16X27180 ROD ASSEMBLY 27"!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
