WH16X10057 GE Washer Rod & Spring Assembly Green
GE General Electric Hotpoint RCA Sears Kenmore Clothes Washer Washing Machine Suspension Rod and Spring - ORANGE WH16X10057We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 1.281500 lbs
Dimension : 27.519600 x 2.283400 x 2.834600
GE General Electric Hotpoint RCA Sears Kenmore Clothes Washer Washing Machine Suspension Rod and Spring - ORANGE WH16X10057We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 1.281500 lbs
Dimension : 27.519600 x 2.283400 x 2.834600
Write Your Own Review
DIY Guide to Replacing the WH16X10057 GE Washer Suspension Rod and Spring - ORANGE
Are your washer’s shocks worn out? Is it time to take a trip to the washer repair shop or do it yourself? If you’re looking to save some time and money, you can easily tackle the replacement of the WH16X10057 GE Washer Suspension Rod and Spring - ORANGE right in your own home. Keeping reading to find out how!
Step 1: Gather Your Tools
Before you get started, make sure you have the proper tools for this project handy. You'll need a Phillips head screwdriver, flat head screwdriver, and adjustable wrench.
Step 2: Unplug the Washer
Safety first! Always unplug your washer before you begin any repairs. This will ensure that you don't accidentally shock yourself or damage the appliance.
Step 3: Remove the Top Panel
Using your Phillips head screwdriver, remove the screws from the top panel of your washer. Carefully remove the panel and set it aside.
Step 4: Locate the Suspension Rod and Spring
The suspension rod and spring should be located towards the back of the washer. The rod is large and will likely have plastic caps on either end. The spring is a metal coil attached to the rod.
Step 5: Disconnect the Suspension Rod and Spring
Using an adjustable wrench, unscrew the plastic caps from the rod and spring. Once you've removed these, you can safely remove the rod and spring by pulling them out of their mounting holes.
Step 6: Install the New Suspension Rod and Spring
Place the new suspension rod and spring into their respective mounting holes. Re-attach the plastic caps, making sure they are securely tightened.
Step 7: Replace the Top Panel
Now that you've replaced the suspension rod and spring, it's time to put the top panel back on. Place it back in its original position and use your Phillips head screwdriver to secure it with the same screws you removed earlier.
Step 8: Test It Out
Plug your washer back in and run a cycle to make sure the suspension rod and spring are working as they should. If everything is running smoothly, you are finished!
Congratulations - you've successfully replaced the WH16X10057 GE Washer Suspension Rod and Spring - ORANGE! Make sure to keep up with regular maintenance checks on your washer to ensure it remains in tip-top shape.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are your washer’s shocks worn out? Is it time to take a trip to the washer repair shop or do it yourself? If you’re looking to save some time and money, you can easily tackle the replacement of the WH16X10057 GE Washer Suspension Rod and Spring - ORANGE right in your own home. Keeping reading to find out how!
Step 1: Gather Your Tools
Before you get started, make sure you have the proper tools for this project handy. You'll need a Phillips head screwdriver, flat head screwdriver, and adjustable wrench.
Step 2: Unplug the Washer
Safety first! Always unplug your washer before you begin any repairs. This will ensure that you don't accidentally shock yourself or damage the appliance.
Step 3: Remove the Top Panel
Using your Phillips head screwdriver, remove the screws from the top panel of your washer. Carefully remove the panel and set it aside.
Step 4: Locate the Suspension Rod and Spring
The suspension rod and spring should be located towards the back of the washer. The rod is large and will likely have plastic caps on either end. The spring is a metal coil attached to the rod.
Step 5: Disconnect the Suspension Rod and Spring
Using an adjustable wrench, unscrew the plastic caps from the rod and spring. Once you've removed these, you can safely remove the rod and spring by pulling them out of their mounting holes.
Step 6: Install the New Suspension Rod and Spring
Place the new suspension rod and spring into their respective mounting holes. Re-attach the plastic caps, making sure they are securely tightened.
Step 7: Replace the Top Panel
Now that you've replaced the suspension rod and spring, it's time to put the top panel back on. Place it back in its original position and use your Phillips head screwdriver to secure it with the same screws you removed earlier.
Step 8: Test It Out
Plug your washer back in and run a cycle to make sure the suspension rod and spring are working as they should. If everything is running smoothly, you are finished!
Congratulations - you've successfully replaced the WH16X10057 GE Washer Suspension Rod and Spring - ORANGE! Make sure to keep up with regular maintenance checks on your washer to ensure it remains in tip-top shape.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
