WH13X10053 GE Washer Water Inlet Valve
This GE WH13X10053 triple water valve is perfect for repairing washing machines and other water appliances. It's designed to replace three existing valves on select GE washers and uses quality components to ensure long-lasting and reliable performance. The connector type is 1/4" quick connect, the internal flow rate is 7.5 gallons per minute, and it has an incoming pressure of between 20 and 160psi. This water valve is easy to install and delivers a powerful, steady stream of water when in use, making it an ideal replacement part for all your water-related needs. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 2.3309 lbs
Dimension : 12 x 10 x 2.7
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This GE WH13X10053 triple water valve is perfect for repairing washing machines and other water appliances. It's designed to replace three existing valves on select GE washers and uses quality components to ensure long-lasting and reliable performance. The connector type is 1/4" quick connect, the internal flow rate is 7.5 gallons per minute, and it has an incoming pressure of between 20 and 160psi. This water valve is easy to install and delivers a powerful, steady stream of water when in use, making it an ideal replacement part for all your water-related needs. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 2.3309 lbs
Dimension : 12 x 10 x 2.7
Write Your Own Review
The following parts are replaced by this product
- WH13X22314
1. Turn off the power supply to the washing machine. Unplug the unit from the electrical outlet.
2. Shut off the hot and cold water supply valves leading to the washing machine.
3. Place a bucket underneath the washer to catch water in the hoses.
4. Disconnect the intake hoses from the triple water valve assembly.
5. Use an adjustable wrench to loosen the mounting screws to remove the old triple water valve.
6. Install the new triple water valve using the same mounting screws in the same location.
7. Reconnect the intake hoses and tighten them with an adjustable wrench.
8. Turn the hot and cold water supply valves on and check for leaks.
9. Plug the washer unit into the electrical outlet and turn the power supply on.
10. Run a cycle to ensure that the new triple water valve works correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Shut off the hot and cold water supply valves leading to the washing machine.
3. Place a bucket underneath the washer to catch water in the hoses.
4. Disconnect the intake hoses from the triple water valve assembly.
5. Use an adjustable wrench to loosen the mounting screws to remove the old triple water valve.
6. Install the new triple water valve using the same mounting screws in the same location.
7. Reconnect the intake hoses and tighten them with an adjustable wrench.
8. Turn the hot and cold water supply valves on and check for leaks.
9. Plug the washer unit into the electrical outlet and turn the power supply on.
10. Run a cycle to ensure that the new triple water valve works correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
