WE49X22606 GE Dryer Exhaust Cover Plate
Part #: GEN WE49X22606
Exhaust cover plate works with some GE, and Hotpoint models of clothes dryers.
Weight : 1.1829 lbs
Dimension : 8.7 x 4.5 x 4.2
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Exhaust cover plate works with some GE, and Hotpoint models of clothes dryers.
Weight : 1.1829 lbs
Dimension : 8.7 x 4.5 x 4.2
Write Your Own Review
The following parts are replaced by this product
- WE1M454
- WE01M0454
- WE01M0393
Replacing the WE49X22606 GE Dryer Exhaust Cover Plate
Do-it-yourselfers who need to replace a broken or old exhaust cover plate on their GE dryer can do so with simple tools and a few steps. Follow this DIY guide to quickly and safely replace the WE49X22606 exhaust cover plate.
Tools Required:
- Phillips head screwdriver
- Flat head screwdriver
- Pliers
Step 1: Unplug the dryer from the wall outlet and remove the lint filter.
Step 2: Carefully remove any lint buildup on the exhaust cover plate and the interior of the dryer drum near the plate.
Step 3: On the rear of the dryer, locate the screws that secure the exhaust cover plate. Using the Phillips head screwdriver, unscrew the screws and remove the plate.
Step 4: Insert the new WE49X22606 exhaust cover plate and use the Phillips head screwdriver to secure it in place.
Step 5: Replace the lint filter and plug the dryer back into the wall outlet.
You have now successfully replaced the WE49X22606 GE Dryer Exhaust Cover Plate.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Do-it-yourselfers who need to replace a broken or old exhaust cover plate on their GE dryer can do so with simple tools and a few steps. Follow this DIY guide to quickly and safely replace the WE49X22606 exhaust cover plate.
Tools Required:
- Phillips head screwdriver
- Flat head screwdriver
- Pliers
Step 1: Unplug the dryer from the wall outlet and remove the lint filter.
Step 2: Carefully remove any lint buildup on the exhaust cover plate and the interior of the dryer drum near the plate.
Step 3: On the rear of the dryer, locate the screws that secure the exhaust cover plate. Using the Phillips head screwdriver, unscrew the screws and remove the plate.
Step 4: Insert the new WE49X22606 exhaust cover plate and use the Phillips head screwdriver to secure it in place.
Step 5: Replace the lint filter and plug the dryer back into the wall outlet.
You have now successfully replaced the WE49X22606 GE Dryer Exhaust Cover Plate.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.