WE04X25198 GE Washer Thermostat
Part #: GEN WE04X25198
This installer-inspired GE WE04X25198 Thermostat is designed to work with your GE dryer We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs
Weight : 0.0262 lbs
Dimension : 3.5039 x 1.6535 x 0.6299
This installer-inspired GE WE04X25198 Thermostat is designed to work with your GE dryer We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs
Weight : 0.0262 lbs
Dimension : 3.5039 x 1.6535 x 0.6299
Write Your Own Review
1. Unplug the dryer from the electrical socket.
2. Remove the rear access panel. The panel is usually held in place by screws.
3. Locate the old thermostat and disconnect the wires from it.
4. Remove the old thermostat and discard it.
5. Place the new GE WE04X25198 thermostat in the same position as the old one.
6. Reconnect the wires to the new thermostat.
7. Replace the rear access panel and secure it with the screws.
8. Plug the dryer back into the electrical outlet.
9. Test the dryer to ensure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the rear access panel. The panel is usually held in place by screws.
3. Locate the old thermostat and disconnect the wires from it.
4. Remove the old thermostat and discard it.
5. Place the new GE WE04X25198 thermostat in the same position as the old one.
6. Reconnect the wires to the new thermostat.
7. Replace the rear access panel and secure it with the screws.
8. Plug the dryer back into the electrical outlet.
9. Test the dryer to ensure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.