WE04X22654 GE Washer Timer
This genuine GE WE04X22654 refrigerator timer is designed for use with some General Electric dryers. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.516 lbs
Dimension : 4.4488 x 4.0551 x 3.9763
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This genuine GE WE04X22654 refrigerator timer is designed for use with some General Electric dryers. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.516 lbs
Dimension : 4.4488 x 4.0551 x 3.9763
Write Your Own Review
The following parts are replaced by this product
- WE4M521
Replacing the GE WE04X22654 Timer
1. Turn off the power to the appliance you’re working on. Disconnect the wires from the old timer and the control panel.
2. Place the new timer in the opening of the control panel and secure it with screws.
3. Find the ports on the back of the new timer that correspond to the wires from the control panel.
4. Connect the wires to the appropriate port on the timer, taking note of the correct polarity. The red wire should always connect to the port marked "L1".
5. Secure the wires in place with the provided wire clips on the back of the timer.
6. Reconnect the power to the appliance and test your new timer.
7. Once the timer is working, use a screwdriver to adjust the timer's settings. Make sure all settings are correct before using.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Turn off the power to the appliance you’re working on. Disconnect the wires from the old timer and the control panel.
2. Place the new timer in the opening of the control panel and secure it with screws.
3. Find the ports on the back of the new timer that correspond to the wires from the control panel.
4. Connect the wires to the appropriate port on the timer, taking note of the correct polarity. The red wire should always connect to the port marked "L1".
5. Secure the wires in place with the provided wire clips on the back of the timer.
6. Reconnect the power to the appliance and test your new timer.
7. Once the timer is working, use a screwdriver to adjust the timer's settings. Make sure all settings are correct before using.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
