WE03X25576 GE Washer Drum Support Bearing
The GE WE03X25576 DRYER Bearing Top Assembly is an essential part of your appliance. T We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 10.9079 lbs
Dimension : 27.3622 x 11.2598 x 4.9212
The GE WE03X25576 DRYER Bearing Top Assembly is an essential part of your appliance. T We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 10.9079 lbs
Dimension : 27.3622 x 11.2598 x 4.9212
Write Your Own Review
DIY INSTRUCTIONS FOR REPLACING A GE WE03X25576 BEARING TOP ASM
1. Shut off the power to the dryer before conducting any repairs.
2. Disconnect the dryer from the power supply before beginning any work.
3. Remove the screws securing the back cover of the dryer.
4. Carefully remove the back cover and access the drum and blower wheel.
5. Disconnect the belt tensioner, blower wheel, and drum from the dryer.
6. Slide out the old bearing top assembly.
7. Insert the new GE WE03X25576 bearing top assembly into the dryer.
8. Replace the blower wheel, belt tensioner, and drum onto the dryer.
9. Reattach the back cover using the screws removed earlier.
10. Restore the power to the dryer.
11. Test the dryer to make sure the repair was successful.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Shut off the power to the dryer before conducting any repairs.
2. Disconnect the dryer from the power supply before beginning any work.
3. Remove the screws securing the back cover of the dryer.
4. Carefully remove the back cover and access the drum and blower wheel.
5. Disconnect the belt tensioner, blower wheel, and drum from the dryer.
6. Slide out the old bearing top assembly.
7. Insert the new GE WE03X25576 bearing top assembly into the dryer.
8. Replace the blower wheel, belt tensioner, and drum onto the dryer.
9. Reattach the back cover using the screws removed earlier.
10. Restore the power to the dryer.
11. Test the dryer to make sure the repair was successful.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
