WD28X26099 GE Dishwasher Complete Service Rack
Complete service rack works with some GE, and Hotpoint models of dishwashers.
Weight : 34.1871 lbs
Dimension : 24 x 22 x 9
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Complete service rack works with some GE, and Hotpoint models of dishwashers.
Weight : 34.1871 lbs
Dimension : 24 x 22 x 9
Write Your Own Review
The following parts are replaced by this product
- WD28X10372
- WD28X10370
- WD28X10371
- WD28X21715
- WD28X22358
- WD28X22619
- WD28X22696
- WD28X21717
- WD28X25958
- WD28X24478
- WD28X24396
- WD28X26103
- WD28X25959
- WD28X22506
Replacing the WD28X26099 GE Dishwasher Complete Service Rack
1. Unplug your dishwasher from its power source. Remove all dishes and racks from the interior of the dishwasher.
2. Take a flathead screwdriver and remove the screws beneath the lower dish rack. This will allow you to access the service rack.
3. Remove the clips or screws that are securing the old service rack in place. Carefully pull the service rack out and set it aside.
4. Place the newly purchased service rack in the empty space where the previous one was located. Secure the service rack with the clips or screws previously removed.
5. Replace the screws beneath the lower dish rack. Plug your dishwasher back into its power source.
6. Test run the dishwasher in a complete cycle to make sure the new service rack is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your dishwasher from its power source. Remove all dishes and racks from the interior of the dishwasher.
2. Take a flathead screwdriver and remove the screws beneath the lower dish rack. This will allow you to access the service rack.
3. Remove the clips or screws that are securing the old service rack in place. Carefully pull the service rack out and set it aside.
4. Place the newly purchased service rack in the empty space where the previous one was located. Secure the service rack with the clips or screws previously removed.
5. Replace the screws beneath the lower dish rack. Plug your dishwasher back into its power source.
6. Test run the dishwasher in a complete cycle to make sure the new service rack is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
