WD22X154 GE Dishwasher Wash Arm Assembly with Tower
General Electric - Hotpoint Dishwasher Wash Arm Assembly With Tower WD22X154
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Weight : 4.3032 lbs
Dimension : 24.1338 x 7.6771 x 3.2283
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
General Electric - Hotpoint Dishwasher Wash Arm Assembly With Tower WD22X154
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Weight : 4.3032 lbs
Dimension : 24.1338 x 7.6771 x 3.2283
Write Your Own Review
The following parts are replaced by this product
- WD22X139
- WD22X148
- WD22X0139
- WD22X0148
- WD22X0154
Replacing Your GE Dishwasher Wash Arm Assembly With Tower
Instructions:
1.Unplug your dishwasher from the power source and turn off the water supply.
2.Open the dishwasher door and locate the bottom rack, remove it from the dishwasher, and pull it out of the way.
3.Locate the two screws that secure the existing wash arm assembly to the dishwasher. Remove these screws and set them aside.
4.Carefully pull the existing wash arm assembly out of the dishwasher.
5.Place the new WD22X154 GE Dishwasher Wash Arm Assembly With Tower in the same location as the old one, making sure that all of the connections are lined up properly.
6.Secure the wash arm assembly in place with the two screws you removed earlier.
7.Replace the bottom rack and close the dishwasher door.
8.Turn on the water supply to the dishwasher and plug it back in to the power source.
9.Run a cycle to test the new wash arm assembly is working properly. If it is, then the installation is complete.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Instructions:
1.Unplug your dishwasher from the power source and turn off the water supply.
2.Open the dishwasher door and locate the bottom rack, remove it from the dishwasher, and pull it out of the way.
3.Locate the two screws that secure the existing wash arm assembly to the dishwasher. Remove these screws and set them aside.
4.Carefully pull the existing wash arm assembly out of the dishwasher.
5.Place the new WD22X154 GE Dishwasher Wash Arm Assembly With Tower in the same location as the old one, making sure that all of the connections are lined up properly.
6.Secure the wash arm assembly in place with the two screws you removed earlier.
7.Replace the bottom rack and close the dishwasher door.
8.Turn on the water supply to the dishwasher and plug it back in to the power source.
9.Run a cycle to test the new wash arm assembly is working properly. If it is, then the installation is complete.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
