WD21X22276 GE Dishwasher Control Board Kit
Main electronic control board kit assembly works with some GE, Hotpoint, and RCA models of dishwashers.
Weight : 8.8249 lbs
Dimension : 30.9842 x 10.1574 x 3.8976
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Main electronic control board kit assembly works with some GE, Hotpoint, and RCA models of dishwashers.
Weight : 8.8249 lbs
Dimension : 30.9842 x 10.1574 x 3.8976
Write Your Own Review
The following parts are replaced by this product
- WD21X10500
- WD21X10529
- WD21X10531
- WD21X20450
- WD21X20720
1. Disconnect the main power to the dishwasher by unplugging it or turning off the circuit breaker.
2. Remove the lower access panel on the dishwasher by using a Phillips head screwdriver to remove the screws holding the panel in place.
3. Using a Phillips head screwdriver, unscrew and remove the two screws securing the old electronic control board.
4. Unplug the electrical connections from the old electronic control board.
5. Place the new electronic control board on the mounting bracket and secure it with the two screws.
6. Reconnect the electrical connections to the new board.
7. Replace the lower access panel and secure it with the screws using a Phillips head screwdriver.
8. Restore the main power to the dishwasher by plugging it in or turning on the circuit breaker.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the lower access panel on the dishwasher by using a Phillips head screwdriver to remove the screws holding the panel in place.
3. Using a Phillips head screwdriver, unscrew and remove the two screws securing the old electronic control board.
4. Unplug the electrical connections from the old electronic control board.
5. Place the new electronic control board on the mounting bracket and secure it with the two screws.
6. Reconnect the electrical connections to the new board.
7. Replace the lower access panel and secure it with the screws using a Phillips head screwdriver.
8. Restore the main power to the dishwasher by plugging it in or turning on the circuit breaker.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
