WD21X21664 GE Dishwasher Wire Harness
This GE WD21X21664 HARNESS ASM DOOR is a genuine OEM part that is made to fit a range of GE and Hotpoint appliance. Get your GE WD21X21664 HARNESS ASM DOOR today and restore your appliance's functionality. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.9568 lbs
Dimension : 14 x 9.5 x 1
This GE WD21X21664 HARNESS ASM DOOR is a genuine OEM part that is made to fit a range of GE and Hotpoint appliance. Get your GE WD21X21664 HARNESS ASM DOOR today and restore your appliance's functionality. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.9568 lbs
Dimension : 14 x 9.5 x 1
Write Your Own Review
DIY Guide to Replacing the GE WD21X21664 HARNESS ASM DOOR
Replacing the wiring harness assembly of the GE WD21X21664 dishwasher door can be a daunting task. Fortunately, this DIY guide will give you easy to follow instructions on how to replace it yourself in just a few steps. With the right tools, knowledge, and patience, you can get this job done in no time!
Materials:
-WD21X21664 GE Dishwasher Door Harness Assembly
-Flat head screwdriver
-Phillips head screwdriver
-Needle nose pliers
Step 1: Unplug the Dishwasher
Unplug the power cable from the wall outlet. This is to ensure your safety throughout the entire process.
Step 2: Remove the Cover
Locate the cover panel located on the top of the dishwasher door. Use a flat head screwdriver to remove the screws from the upper lip of the panel. Carefully lift off the cover and set aside for later.
Step 3: Disconnect the Wires
Locate the existing wiring harness. Carefully disconnect the wires from the back of the harness. Be sure to make note of where each wire attaches, as you will need to reconnect these in the same orientation once you install the new harness.
Step 4: Install the New Wiring Harness
Insert the new wiring harness into the back of the dishwasher door. Make sure it is securely fitted into place.
Step 5: Reconnect the Wires
Using the notes taken in Step 3, carefully reconnect the wires to the new harness. Make sure all connections are secure.
Step 6: Replace the Cover
Carefully place the cover panel back on the top of the dishwasher door and replace the screws.
Step 7: Test It Out
Plug the dishwasher back into the wall outlet. Press the power button and wait for the dishwasher to turn on. If it does, congratulations! You have successfully replaced the GE WD21X21664 Harness Assembly Door.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the wiring harness assembly of the GE WD21X21664 dishwasher door can be a daunting task. Fortunately, this DIY guide will give you easy to follow instructions on how to replace it yourself in just a few steps. With the right tools, knowledge, and patience, you can get this job done in no time!
Materials:
-WD21X21664 GE Dishwasher Door Harness Assembly
-Flat head screwdriver
-Phillips head screwdriver
-Needle nose pliers
Step 1: Unplug the Dishwasher
Unplug the power cable from the wall outlet. This is to ensure your safety throughout the entire process.
Step 2: Remove the Cover
Locate the cover panel located on the top of the dishwasher door. Use a flat head screwdriver to remove the screws from the upper lip of the panel. Carefully lift off the cover and set aside for later.
Step 3: Disconnect the Wires
Locate the existing wiring harness. Carefully disconnect the wires from the back of the harness. Be sure to make note of where each wire attaches, as you will need to reconnect these in the same orientation once you install the new harness.
Step 4: Install the New Wiring Harness
Insert the new wiring harness into the back of the dishwasher door. Make sure it is securely fitted into place.
Step 5: Reconnect the Wires
Using the notes taken in Step 3, carefully reconnect the wires to the new harness. Make sure all connections are secure.
Step 6: Replace the Cover
Carefully place the cover panel back on the top of the dishwasher door and replace the screws.
Step 7: Test It Out
Plug the dishwasher back into the wall outlet. Press the power button and wait for the dishwasher to turn on. If it does, congratulations! You have successfully replaced the GE WD21X21664 Harness Assembly Door.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
