WD12X10184 GE Dishwasher Slide Rail Endcap
Part #: GEN WD12X10184
WD12X10184 GE Dishwasher Slide Rail Endcap
Weight : 0.013800 lbs
Dimension : 1.692900 x 1.259800 x 0.905500
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
WD12X10184 GE Dishwasher Slide Rail Endcap
Weight : 0.013800 lbs
Dimension : 1.692900 x 1.259800 x 0.905500
Write Your Own Review
The following parts are replaced by this product
- WD12X10123
Replacing the WD12X10184 GE Slide Rail End Cap: A DIY Guide
Are your GE slide rail end caps looking worn out? Replacing them is a straightforward process that you can do yourself with a few common tools and supplies. Follow these steps for a safe, quick and guide on replacing the WD12X10184 GE Slide Rail End Cap.
Step 1: Disconnect your dishwasher from the power source.
Before starting the repair, you should make sure that the dishwasher is not connected to a power source. To do this, turn off the circuit breaker or unplug the power cord. This will ensure that your health and safety is not put in jeopardy during the repair.
Step 2: Remove the old slide rail end caps.
Using a screwdriver, carefully remove the screws securing the end caps to the dishwasher slide rails. Make sure that you keep track of all parts that are removed. Afterward, you should be able to pull the old slide rail end caps away from the dishwasher.
Step 3: Prepare the new slide rail end caps.
Once the old slide rail end caps are removed, you should take the new end caps and insert them into the rail grooves. They should slide easily into place; if there is any resistance, check to make sure the ends of the tabs are properly lined up with the grooves in the rails.
Step 4: Secure the new slide rail end caps.
Using a screwdriver, secure the new slide rail end caps by tightening the screws. Make sure that they are properly tightened so that they do not come loose during use.
Step 5: Reconnect the power source.
Once everything is secured and in place, you can reconnect the dishwasher to the power source. Double check that all of the connections are properly made and that the dishwasher is functioning correctly before returning it to its normal use.
The GE Slide Rail End Caps are an important and necessary part of your dishwasher and it’s important to replace them when needed. Following the steps above will help you to safely and efficiently replace the WD12X10184 GE Slide Rail End Cap, giving you peace of mind that your dishwasher is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are your GE slide rail end caps looking worn out? Replacing them is a straightforward process that you can do yourself with a few common tools and supplies. Follow these steps for a safe, quick and guide on replacing the WD12X10184 GE Slide Rail End Cap.
Step 1: Disconnect your dishwasher from the power source.
Before starting the repair, you should make sure that the dishwasher is not connected to a power source. To do this, turn off the circuit breaker or unplug the power cord. This will ensure that your health and safety is not put in jeopardy during the repair.
Step 2: Remove the old slide rail end caps.
Using a screwdriver, carefully remove the screws securing the end caps to the dishwasher slide rails. Make sure that you keep track of all parts that are removed. Afterward, you should be able to pull the old slide rail end caps away from the dishwasher.
Step 3: Prepare the new slide rail end caps.
Once the old slide rail end caps are removed, you should take the new end caps and insert them into the rail grooves. They should slide easily into place; if there is any resistance, check to make sure the ends of the tabs are properly lined up with the grooves in the rails.
Step 4: Secure the new slide rail end caps.
Using a screwdriver, secure the new slide rail end caps by tightening the screws. Make sure that they are properly tightened so that they do not come loose during use.
Step 5: Reconnect the power source.
Once everything is secured and in place, you can reconnect the dishwasher to the power source. Double check that all of the connections are properly made and that the dishwasher is functioning correctly before returning it to its normal use.
The GE Slide Rail End Caps are an important and necessary part of your dishwasher and it’s important to replace them when needed. Following the steps above will help you to safely and efficiently replace the WD12X10184 GE Slide Rail End Cap, giving you peace of mind that your dishwasher is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.