WD12X10163 GE Dishwasher Detergent and Rinse Aid Dispenser Module

100% Guaranteed genuine parts logo
Part #: GEN WD12X10163
100% Guaranteed genuine parts logo
Rating:
80% of 100
GE General Electric Hotpoint Sears Kenmore Dishwasher Detergent and Rinse Aid Dispenser Module WD12X10163

We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.

Weight : 0.379400 lbs
Dimension : 7.716500 x 3.543300 x 1.929100
Special Price $49.37 Regular Price $54.86 10% off
In stock
GE General Electric Hotpoint Sears Kenmore Dishwasher Detergent and Rinse Aid Dispenser Module WD12X10163

We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.

Weight : 0.379400 lbs
Dimension : 7.716500 x 3.543300 x 1.929100
Write Your Own Review
You're reviewing:WD12X10163 GE Dishwasher Detergent and Rinse Aid Dispenser Module
Your Rating

Image size should not exceed 5 MB. File format must be JPG or PNG.

The following parts are replaced by this product

  1. WD12X10046
  2. WD12X10162
  3. WD12X10207
  4. WD12X10205
  5. WD12X10237
  6. WD12X10240
Instructions for Replacing the WD12X10163 GE Dishwasher Detergent and Rinse Aid Dispenser Module

Tools Needed:
-Phillips head screwdriver
-Pliers
-Replacement part (WD12X10163 GE Dishwasher Detergent and Rinse Aid Dispenser Module)

Step 1: Unplug the power cord from the outlet supplying electricity to your dishwasher. This is an important safety precaution to take to avoid electric shock.

Step 2: Open the dishwasher door and locate the detergent and rinse aid dispenser module. It should be located on the inside of the door panel.

Step 3: Use a Phillips head screwdriver to remove the screws that secure the dispenser module to the door panel.

Step 4: Carefully lift the dispenser module in order to disconnect the wiring harness. Use pliers if needed to disconnect the wires.

Step 5: Remove the old dispenser module and discard it.

Step 6: Insert the replacement dispense module in the same spot where the old one was located and reattach the wiring harness.

Step 7: Secure the replacement module to the door panel with the Phillips head screws you removed in Step 3.

Step 8: Plug the power cord back into the outlet and test the new dispenser module to ensure it is working properly.

Congratulations - you have now successfully replaced the WD12X10163 GE Dishwasher Detergent and Rinse Aid Dispenser Module!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Compatible with