WD08X22095 GE Dishwasher Tub Gasket
Tub gasket works with some GE, and Hotpoint models of dishwashers.
Weight : 0.8853 lbs
Dimension : 7.6377 x 7.4409 x 2.1653
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Tub gasket works with some GE, and Hotpoint models of dishwashers.
Weight : 0.8853 lbs
Dimension : 7.6377 x 7.4409 x 2.1653
Write Your Own Review
The following parts are replaced by this product
- WD08X20675
1. Unplug the dishwasher from the power source before attempting any repairs.
2. Open up the access panel on the bottom of your dishwasher. You may need to remove screws to do this.
3. Locate the existing tub gasket and carefully remove it.
4. Install the new WD08X22095 GE Dishwasher Tub Gasket by guiding each side of the gasket into the slots in the dishwasher tub.
5. Once the gasket is installed, secure it with the provided screws and/or clips.
6. Close the access panel and plug in the dishwasher. Make sure that the gasket is securely in place before running a cycle.
7. Test the dishwasher and ensure that the tub gasket works properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Open up the access panel on the bottom of your dishwasher. You may need to remove screws to do this.
3. Locate the existing tub gasket and carefully remove it.
4. Install the new WD08X22095 GE Dishwasher Tub Gasket by guiding each side of the gasket into the slots in the dishwasher tub.
5. Once the gasket is installed, secure it with the provided screws and/or clips.
6. Close the access panel and plug in the dishwasher. Make sure that the gasket is securely in place before running a cycle.
7. Test the dishwasher and ensure that the tub gasket works properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
