WB39X10034 GE Oven Waveguide Cover
The GE WB39X10034 Cover Wave Guide is a must-have replacement part for your microwave. Keep your microwave running optimally with this essential GE replacement part. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.4851 lbs
Dimension : 10.6299 x 7.3622 x 2.6377
The GE WB39X10034 Cover Wave Guide is a must-have replacement part for your microwave. Keep your microwave running optimally with this essential GE replacement part. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.4851 lbs
Dimension : 10.6299 x 7.3622 x 2.6377
Write Your Own Review
Replacing the GE WB39X10034 COVER Wave Guide
1. Make sure to unplug the microwave before attempting any repairs.
2. Locate the two screws on the top panel of the microwave and remove them using a Phillips head screwdriver.
3. Carefully lift off the top panel to expose the wave guide cover.
4. Remove the four screws that are securing the wave guide cover in place using a Phillips head screwdriver.
5. Gently lift the cover off, taking care not to damage any of the components inside.
6. Place the new wave guide cover in its place and secure it with the four screws.
7. Replace the top panel and screws and plug the microwave into the electrical outlet.
8. Test the microwave to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Make sure to unplug the microwave before attempting any repairs.
2. Locate the two screws on the top panel of the microwave and remove them using a Phillips head screwdriver.
3. Carefully lift off the top panel to expose the wave guide cover.
4. Remove the four screws that are securing the wave guide cover in place using a Phillips head screwdriver.
5. Gently lift the cover off, taking care not to damage any of the components inside.
6. Place the new wave guide cover in its place and secure it with the four screws.
7. Replace the top panel and screws and plug the microwave into the electrical outlet.
8. Test the microwave to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
