WB27K10312 GE Oven Glass and Touch Control Assembly
Elevate your cooking experience with this high-quality touch control assembly designed for GE ovens and compatible brands including Hotpoint, Haier, Monogram, and Café. This essential component ensures precision in oven settings, allowing seamless navigation through functions like baking, broiling, and timer adjustments. Crafted with durability in mind, the assembly includes a glass interface for easy cleaning, promoting a hygienic kitchen environment.
Installation is straightforward, making it accessible for those who prefer DIY repairs. Restoring full functionality to your appliance not only enhances culinary performance but also prolongs the life of your oven. Whether you're upgrading or replacing a worn part, this touchpad and control assembly is a reliable choice for maintaining your kitchen's efficiency.
Weight : 4.854200 lbs
Dimension : 18.800000 x 9.700000 x 3.700000
Elevate your cooking experience with this high-quality touch control assembly designed for GE ovens and compatible brands including Hotpoint, Haier, Monogram, and Café. This essential component ensures precision in oven settings, allowing seamless navigation through functions like baking, broiling, and timer adjustments. Crafted with durability in mind, the assembly includes a glass interface for easy cleaning, promoting a hygienic kitchen environment.
Installation is straightforward, making it accessible for those who prefer DIY repairs. Restoring full functionality to your appliance not only enhances culinary performance but also prolongs the life of your oven. Whether you're upgrading or replacing a worn part, this touchpad and control assembly is a reliable choice for maintaining your kitchen's efficiency.
Weight : 4.854200 lbs
Dimension : 18.800000 x 9.700000 x 3.700000
Write Your Own Review
Replacing the GE WB27K10312 Glass & Touch Board Assembly
1. Shut off all power to the unit by unplugging it from the wall.
2. Remove the mounting screws from the back of the oven control panel with a screwdriver.
3. Carefully remove the control panel and set it aside.
4. Remove the screws that secure the glass & touch board assembly to the backing panel of the oven.
5. Pull the wiring harness out of the connector.
6. Disconnect the wiring harness cable from the back of the glass & touch board assembly.
7. Carefully remove the board and set it aside.
8. Clean the area around where the board was located with a damp cloth.
9. Place the new board assembly in place and secure it with the screws you removed.
10. Reconnect the wiring harness cable to the back of the board.
11. Plug the connector back into the wiring harness.
12. Carefully replace the control panel, making sure to line up the mounting holes with those on the oven.
13. Secure the control panel with the screws you removed in the first step.
14. Turn the power back on to the unit and test the board to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Shut off all power to the unit by unplugging it from the wall.
2. Remove the mounting screws from the back of the oven control panel with a screwdriver.
3. Carefully remove the control panel and set it aside.
4. Remove the screws that secure the glass & touch board assembly to the backing panel of the oven.
5. Pull the wiring harness out of the connector.
6. Disconnect the wiring harness cable from the back of the glass & touch board assembly.
7. Carefully remove the board and set it aside.
8. Clean the area around where the board was located with a damp cloth.
9. Place the new board assembly in place and secure it with the screws you removed.
10. Reconnect the wiring harness cable to the back of the board.
11. Plug the connector back into the wiring harness.
12. Carefully replace the control panel, making sure to line up the mounting holes with those on the oven.
13. Secure the control panel with the screws you removed in the first step.
14. Turn the power back on to the unit and test the board to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
