WB24X26784 GE Oven Thermostat
The GE WB24X26784 MAGNETRON THERMOSTAT is the perfect choice for your microwave. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.3022 lbs
Dimension : 8 x 7.5 x 0.7
The GE WB24X26784 MAGNETRON THERMOSTAT is the perfect choice for your microwave. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.3022 lbs
Dimension : 8 x 7.5 x 0.7
Write Your Own Review
How to Replace a GE WB24X26784 Magnetron Thermostat
Replacing the thermistor on a GE WB24X26784 magnetron can be a daunting task, but with the right tools and instructions, it can be done quickly and safely. Follow these steps to replace the thermistor on your GE WB24X26784 magnetron.
1. Unplug the microwave from the wall outlet and turn off the breaker for the appliance.
2. Remove the screws holding the outer cover of the microwave and carefully set it aside.
3. Locate the magnetron thermostat near the center of the appliance. It should be a small, circular component located on the side of the appliance.
4. Disconnect the wiring that connects the old thermistor with the appliance by gently pulling it out.
5. Insert the new thermistor into the same socket that the old one was removed from.
6. Reconnect the wiring to the new thermistor, making sure all of the wires are connected securely.
7. Reassemble the microwave by replacing the outer cover and screws.
8. Plug the microwave back into the wall outlet and turn the breaker for the appliance back on.
9. Test the microwave to make sure the new thermistor is functioning properly.
By following these steps, you can easily and safely replace the thermistor on your GE WB24X26784 magnetron.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the thermistor on a GE WB24X26784 magnetron can be a daunting task, but with the right tools and instructions, it can be done quickly and safely. Follow these steps to replace the thermistor on your GE WB24X26784 magnetron.
1. Unplug the microwave from the wall outlet and turn off the breaker for the appliance.
2. Remove the screws holding the outer cover of the microwave and carefully set it aside.
3. Locate the magnetron thermostat near the center of the appliance. It should be a small, circular component located on the side of the appliance.
4. Disconnect the wiring that connects the old thermistor with the appliance by gently pulling it out.
5. Insert the new thermistor into the same socket that the old one was removed from.
6. Reconnect the wiring to the new thermistor, making sure all of the wires are connected securely.
7. Reassemble the microwave by replacing the outer cover and screws.
8. Plug the microwave back into the wall outlet and turn the breaker for the appliance back on.
9. Test the microwave to make sure the new thermistor is functioning properly.
By following these steps, you can easily and safely replace the thermistor on your GE WB24X26784 magnetron.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
