WB20K10015 GE Oven Temperature Sensor

1. Unplug the refrigerator from the wall outlet to prevent any electrical shock.

2. Locate the temperature sensor or thermistor in the back of the refrigerator near the top.

3. Remove the bracket or insulation covering the temperature sensor.

4. Disconnect the wiring harness that connects to the temperature sensor by gently pulling it away.

5. Install the new GE WB20K10015 temperature sensor by connecting the wiring harness and securing it with the bracket or insulation.

6. Plug the refrigerator back into the wall outlet and turn it on.

7. Test the temperature sensor by setting the refrigerator control to different settings. Allow 24 hours for the refrigerator to cool down completely before adjusting the temperature setting further.

8. If the temperature does not cool properly, repeat the process and verify that the wiring is connected properly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.