GFC520N GE Continuous Feed Dispenser 1/2 HP
1/2 HP Continuous Feed Garbage Disposal be GE General Electric GFC520V
Sporting a powerful 2,800 RPM motor, this GE 1/2 HP Continuous-Feed Garbage Disposal makes the grinding and draining of undesirable food waste a snap, making use of jam-resistant dual stainless-steel swivel impellers to help get the job done while helping to prevent disposer clogs. EZ mount installation ensures quick and easy setup.
● EZ mount installation makes setup quick and easy
● 2,800 RPM, 1/2 HP motor rapidly grinds food waste for easy drainage
● Large-capacity disposer chamber with cold-rolled carbon steel armature shaft, dishwasher drain connector, stainless-steel sink flange and galvanized steel turntable for durability and expanded waste disposal
● Splash guard helps keep you safe from debris
● Continuous-feed capability, jam-resistant dual stainless-steel swivel impellers and 2-level pre-cutter help prevent disposer clogs
● Manual reset overload protector helps keep the disposer safe from damage
● Sound insulation package reduces operational noise for a quieter kitchen
● Cold-Rolled Carbon Steel Armature Shaft Material
● Splash Guard
● Wall Switch with Sink Stopper
● Manual Reset Overload Protector
● Dishwasher Drain Connector
● Stainless Steel Sink Flange Galvanized Steel Turntable 2 Level Pre-cutter
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Sporting a powerful 2,800 RPM motor, this GE 1/2 HP Continuous-Feed Garbage Disposal makes the grinding and draining of undesirable food waste a snap, making use of jam-resistant dual stainless-steel swivel impellers to help get the job done while helping to prevent disposer clogs. EZ mount installation ensures quick and easy setup.
● EZ mount installation makes setup quick and easy
● 2,800 RPM, 1/2 HP motor rapidly grinds food waste for easy drainage
● Large-capacity disposer chamber with cold-rolled carbon steel armature shaft, dishwasher drain connector, stainless-steel sink flange and galvanized steel turntable for durability and expanded waste disposal
● Splash guard helps keep you safe from debris
● Continuous-feed capability, jam-resistant dual stainless-steel swivel impellers and 2-level pre-cutter help prevent disposer clogs
● Manual reset overload protector helps keep the disposer safe from damage
● Sound insulation package reduces operational noise for a quieter kitchen
● Cold-Rolled Carbon Steel Armature Shaft Material
● Splash Guard
● Wall Switch with Sink Stopper
● Manual Reset Overload Protector
● Dishwasher Drain Connector
● Stainless Steel Sink Flange Galvanized Steel Turntable 2 Level Pre-cutter
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 3.357100 lbs
Dimension : 13.110000 x 5.870000 x 6.020000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
1/2 HP Continuous Feed Garbage Disposal be GE General Electric GFC520V
Sporting a powerful 2,800 RPM motor, this GE 1/2 HP Continuous-Feed Garbage Disposal makes the grinding and draining of undesirable food waste a snap, making use of jam-resistant dual stainless-steel swivel impellers to help get the job done while helping to prevent disposer clogs. EZ mount installation ensures quick and easy setup.
● EZ mount installation makes setup quick and easy
● 2,800 RPM, 1/2 HP motor rapidly grinds food waste for easy drainage
● Large-capacity disposer chamber with cold-rolled carbon steel armature shaft, dishwasher drain connector, stainless-steel sink flange and galvanized steel turntable for durability and expanded waste disposal
● Splash guard helps keep you safe from debris
● Continuous-feed capability, jam-resistant dual stainless-steel swivel impellers and 2-level pre-cutter help prevent disposer clogs
● Manual reset overload protector helps keep the disposer safe from damage
● Sound insulation package reduces operational noise for a quieter kitchen
● Cold-Rolled Carbon Steel Armature Shaft Material
● Splash Guard
● Wall Switch with Sink Stopper
● Manual Reset Overload Protector
● Dishwasher Drain Connector
● Stainless Steel Sink Flange Galvanized Steel Turntable 2 Level Pre-cutter
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Sporting a powerful 2,800 RPM motor, this GE 1/2 HP Continuous-Feed Garbage Disposal makes the grinding and draining of undesirable food waste a snap, making use of jam-resistant dual stainless-steel swivel impellers to help get the job done while helping to prevent disposer clogs. EZ mount installation ensures quick and easy setup.
● EZ mount installation makes setup quick and easy
● 2,800 RPM, 1/2 HP motor rapidly grinds food waste for easy drainage
● Large-capacity disposer chamber with cold-rolled carbon steel armature shaft, dishwasher drain connector, stainless-steel sink flange and galvanized steel turntable for durability and expanded waste disposal
● Splash guard helps keep you safe from debris
● Continuous-feed capability, jam-resistant dual stainless-steel swivel impellers and 2-level pre-cutter help prevent disposer clogs
● Manual reset overload protector helps keep the disposer safe from damage
● Sound insulation package reduces operational noise for a quieter kitchen
● Cold-Rolled Carbon Steel Armature Shaft Material
● Splash Guard
● Wall Switch with Sink Stopper
● Manual Reset Overload Protector
● Dishwasher Drain Connector
● Stainless Steel Sink Flange Galvanized Steel Turntable 2 Level Pre-cutter
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 3.357100 lbs
Dimension : 13.110000 x 5.870000 x 6.020000
Write Your Own Review
The following parts are replaced by this product
- GFC520FDS
- GFC520F
- GFC520V
- GFC520T
Replacing a 1/2HP Continuous Feed Disposal
One of the most common household appliances is a garbage disposal, and if yours has stopped working it might be time to replace it. To help ensure your safety, you should always wear protective gear such as gloves and safety glasses when attempting any home repair. With this in mind, here are some tips for replacing your 1/2HP continuous feed disposal.
Step 1: Turn off the Power
Before you start, make sure you disconnect the power from the disposal unit by unplugging it or turning off the circuit breaker for that area.
Step 2: Remove the Mounting Bracket
Use a screwdriver or socket wrench to loosen and remove all of the mounting screws and plate. Do not discard the screws or plate, as you’ll need them later.
Step 3: Separate the Disposal Unit
Once the mounting hardware is removed, you can gently pull the old disposal unit away from the sink flange. Make sure to hold onto the unit securely, as it may become detached during this process.
Step 4: Clean the Sink Flange
Make sure to clean the sink flange thoroughly with a damp cloth, as any debris or buildup may prevent the new disposal from fitting properly.
Step 5: Install the New Disposal
Place the new disposal unit into the sink opening, making sure to line it up with the sink flange. Use the mounting hardware to secure it in place. Reattach the clamping ring, if necessary.
Step 6: Connect the Plumbing
Connect the drain pipes and reconnect the power to the disposal unit. Make sure all connections are secured.
Step 7: Test the Disposal
Turn on the power and run cold water into the disposal unit. If everything is working properly, you should hear the motor running. If the motor is not running, turn off the power and double check all connections before trying again.
Congratulations! You’ve successfully replaced your 1/2HP continuous feed disposal.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
One of the most common household appliances is a garbage disposal, and if yours has stopped working it might be time to replace it. To help ensure your safety, you should always wear protective gear such as gloves and safety glasses when attempting any home repair. With this in mind, here are some tips for replacing your 1/2HP continuous feed disposal.
Step 1: Turn off the Power
Before you start, make sure you disconnect the power from the disposal unit by unplugging it or turning off the circuit breaker for that area.
Step 2: Remove the Mounting Bracket
Use a screwdriver or socket wrench to loosen and remove all of the mounting screws and plate. Do not discard the screws or plate, as you’ll need them later.
Step 3: Separate the Disposal Unit
Once the mounting hardware is removed, you can gently pull the old disposal unit away from the sink flange. Make sure to hold onto the unit securely, as it may become detached during this process.
Step 4: Clean the Sink Flange
Make sure to clean the sink flange thoroughly with a damp cloth, as any debris or buildup may prevent the new disposal from fitting properly.
Step 5: Install the New Disposal
Place the new disposal unit into the sink opening, making sure to line it up with the sink flange. Use the mounting hardware to secure it in place. Reattach the clamping ring, if necessary.
Step 6: Connect the Plumbing
Connect the drain pipes and reconnect the power to the disposal unit. Make sure all connections are secured.
Step 7: Test the Disposal
Turn on the power and run cold water into the disposal unit. If everything is working properly, you should hear the motor running. If the motor is not running, turn off the power and double check all connections before trying again.
Congratulations! You’ve successfully replaced your 1/2HP continuous feed disposal.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
