67064 Cadet Manufacturing Thermostat Kit (White)
Part #: CMC 67064
67064 Cadet Thermostat Kit (White)
Weight : 0.000000 lbs
67064 Cadet Thermostat Kit (White)
Weight : 0.000000 lbs
Write Your Own Review
Replacing the Cadet Manufacturing 67064 Cadet Thermostat Kit
1. Turn off the power to the heating/cooling system. This can be done by flipping the switch on the circuit breaker box.
2. Unscrew the existing thermostat from the wall and remove it. Discard of the old thermostat.
3. Carefully unpack the Cadet Manufacturing 67064 Cadet Thermostat Kit. Make sure to look over all the components.
4. Locate the wires connected to the existing thermostat and mark them to help with the installation.
5. Connect the wires to the new thermostat, matching the colored wires with their corresponding letter designation on the terminal screws.
6. Mount the thermostat onto the wall using the provided mounting screws.
7. Ensure that the wires are properly connected and turn on the power to the heating/cooling system.
8. Test the thermostat by adjusting the temperature setting and make sure that the system activates as expected.
9. If everything is working correctly, enjoy your new Cadet Manufacturing 67064 Cadet Thermostat Kit.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Turn off the power to the heating/cooling system. This can be done by flipping the switch on the circuit breaker box.
2. Unscrew the existing thermostat from the wall and remove it. Discard of the old thermostat.
3. Carefully unpack the Cadet Manufacturing 67064 Cadet Thermostat Kit. Make sure to look over all the components.
4. Locate the wires connected to the existing thermostat and mark them to help with the installation.
5. Connect the wires to the new thermostat, matching the colored wires with their corresponding letter designation on the terminal screws.
6. Mount the thermostat onto the wall using the provided mounting screws.
7. Ensure that the wires are properly connected and turn on the power to the heating/cooling system.
8. Test the thermostat by adjusting the temperature setting and make sure that the system activates as expected.
9. If everything is working correctly, enjoy your new Cadet Manufacturing 67064 Cadet Thermostat Kit.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
