400202 Cadet Manufacturing Heater Mounting Stand

DIY Guide to Replacing the Cadet Manufacturing 400202 Mounting Stand Bracket

Replacing your mounting stand bracket is a simple yet essential step in maintaining your Cadet Manufacturing 400202 heater. The following step-by-step guide will walk you through the process of replacing the mounting stand bracket on your heater.

Instructions:

1. Before you begin, make sure that the power to the heater is turned off.

2. Unscrew the screws from the mounting stand bracket.

3. Remove the existing bracket from the heater.

4. Set the new mounting stand bracket in place.

5. Securely fasten it using the screws.

6. Turn the power back on and test the heater to make sure it’s working properly.

That’s it! You’ve now replaced the mounting stand bracket on your Cadet Manufacturing 400202 heater.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.