300701 Cadet Manufacturing J Box Cover Aluminium
Part #: CMC 300701
300701 Cadet J Box Cover Aluminium
Weight : 0.228900 lbs
Dimension : 6.417300 x 5.039300 x 0.984200
300701 Cadet J Box Cover Aluminium
Weight : 0.228900 lbs
Dimension : 6.417300 x 5.039300 x 0.984200
Write Your Own Review
1. Safety First: Before you begin, make sure that the power is off to the Cadet Manufacturing BB-J-Box. Shut off the breaker switch in the circuit box and ensure that the switch cannot be easily turned back on.
2. Remove the Old Cover: Use a flat head screwdriver to carefully remove the screws that are securely holding the old cover in place. Once the screws have been removed, carefully lift the cover off the Cadet Manufacturing BB-J-Box.
3. Clean the Box: Inspect the box for any dust, dirt or debris that may need to be removed before reattaching the new cover. Use a damp cloth to gently wipe down the box and clear away any dirt or dust.
4. Install the New Cover: Take the new aluminum 300701 Cadet Manufacturing BB-J-Box Cover and carefully align it on top of the box. Securely fasten the cover in place with the screws that were removed from the old cover.
5. Test the Cover: Turn the power back on to the Cadet Manufacturing BB-J-Box and check to make sure that the new cover is securely in place. Make sure that the cover does not move or make any noises.
6. Enjoy your new aluminum 300701 Cadet Manufacturing BB-J-Box Cover!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the Old Cover: Use a flat head screwdriver to carefully remove the screws that are securely holding the old cover in place. Once the screws have been removed, carefully lift the cover off the Cadet Manufacturing BB-J-Box.
3. Clean the Box: Inspect the box for any dust, dirt or debris that may need to be removed before reattaching the new cover. Use a damp cloth to gently wipe down the box and clear away any dirt or dust.
4. Install the New Cover: Take the new aluminum 300701 Cadet Manufacturing BB-J-Box Cover and carefully align it on top of the box. Securely fasten the cover in place with the screws that were removed from the old cover.
5. Test the Cover: Turn the power back on to the Cadet Manufacturing BB-J-Box and check to make sure that the new cover is securely in place. Make sure that the cover does not move or make any noises.
6. Enjoy your new aluminum 300701 Cadet Manufacturing BB-J-Box Cover!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
