230160 Cadet Manufacturing Heater Switch with Lead Wires

Step 1: Turn off power to the 230160 Cadet Manufacturing Heater. Unplug or remove any fuses related to the heater before proceeding.

Step 2: Remove the screws that secure the 230160 Cadet Manufacturing Heater switch to the wall.

Step 3: Disconnect the two lead wires from the existing switch, then remove the switch from the wall.

Step 4: Take the new Cadet Manufacturing Heater Switch with Lead Wires and connect the two lead wires to the labeled terminals on the back of the switch.

Step 5: Secure the new switch on the wall, then turn the power back on and test the switch. If everything is working correctly, tighten the screws and secure the switch in place.

Step 6: Replace any fuse related to the heater and turn it on to ensure proper operation.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.