13461 Cadet Manufacturing 83" SoftHeat Baseboard Heater
Part #: CMC 13461
NOTE: When ordering parts from the website, please verify your part number is correct for your model before ordering. Parts may look the same but the size and shape can have small variations.
Weight : 0.000000 lbs
NOTE: When ordering parts from the website, please verify your part number is correct for your model before ordering. Parts may look the same but the size and shape can have small variations.
Weight : 0.000000 lbs
Write Your Own Review
Replacing the Whirlpool W10677244 GLASS DOOR
DIY Instructions
1. Start by unplugging your washer and/or dryer from the power source. Make sure it is completely free of power before continuing.
2. Locate the screws that hold the glass door in place. These screws are usually located on the top and bottom of the washer or dryer.
3. Loosen and remove all of the screws holding the door in place and carefully remove the door.
4. Place the new glass door into the opening and make sure it fits securely.
5. Replace the screws that were originally used to secure the old door in place, using the same screw holes. Tighten the screws securely, but don't overtighten.
6. Plug the washer or dryer back into the power source and test to see if the new door is operational.
7. Congratulations, you have successfully replaced your Whirlpool W10677244 GLASS DOOR!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Instructions
1. Start by unplugging your washer and/or dryer from the power source. Make sure it is completely free of power before continuing.
2. Locate the screws that hold the glass door in place. These screws are usually located on the top and bottom of the washer or dryer.
3. Loosen and remove all of the screws holding the door in place and carefully remove the door.
4. Place the new glass door into the opening and make sure it fits securely.
5. Replace the screws that were originally used to secure the old door in place, using the same screw holes. Tighten the screws securely, but don't overtighten.
6. Plug the washer or dryer back into the power source and test to see if the new door is operational.
7. Congratulations, you have successfully replaced your Whirlpool W10677244 GLASS DOOR!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
