040003 Cadet Manufacturing Wall Heater Thermostat Knob Single Pole

Replacing the V8043E PWR Head

1. Begin by turning off power to the heating and cooling system, and then turning off the circuit breaker to the V8043E PWR head.

2. Unscrew the metal clamps or screws that secure the existing V8043E PWR head to the wall.

3. Remove the wires from the existing V8043E PWR head. Label each wire to easily identify the location when inserting into the new PWR head.

4. Dispose of the old V8043E PWR head safely.

5. Connect the wires of the new V8043E PWR head with their corresponding labels. Then, reattach the metal clamps or screws that secure the new PWR head to the wall.

6. Restore power to the heating and cooling system, and reset the circuit breaker for the V8043E PWR head.

7. Test the new V8043E PWR head to make sure that it is working properly.

Following these simple steps can help you safely and easily replace your home’s V8043E PWR head. If you have any questions or need some extra help, contact a professional technician to assist you.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.