SNTK7504000 Broan Lamp Light Bulb Cover

1. Start by unplugging your range hood light fixture from the electrical socket. If you are unsure of how to do this, refer to the instruction manual that came with your range hood.

2. Place a stepladder under the range hood light fixture and use it to carefully reach the top of the fixture so you can access the lamp light bulb cover.

3. Carefully remove the screws located on the edges of the lamp light bulb cover. If you can’t use a screwdriver, you can use a pair of pliers.

4. Gently remove the lamp light bulb cover from the fixture and set it aside.

5. Take out the old SNTK7504000 lamp light bulb cover from its packaging and check if it fits properly into the fixture. Ensure that all of the edges are even, and there are no gaps between the edges of the cover and the fixture.

6. Secure the new lamp light bulb cover in place using the screws that you removed earlier.

7. Once finished, turn on the power and check to see if the new lamp light bulb cover is working properly.

8. Finally, enjoy your newly fixed range hood light fixture.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.