Roper Appliance Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Washer Rear Leveling Leg is a plastic replacement part that allows your appliance to sit perfectly flat. Install the new leveling leg and test to see if you have it adjus ...ted properly by putting the appliance on all four legs. Adjust the new part in or out as required if your washer is unsteady. Note that you may need assistance tilting and balancing the appliance while completing this repair. Each leveling leg is sold separately; this leg is meant for the rear of your washer and includes the pin. Replacing this part will require basic hand tools, but no disassembly or repair experience. Helpful Tip: We recommend checking the other three leveling legs on your appliance in case they are also damaged or worn and require replacement. We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Washer Rear Leveling Leg• Tools Needed: 9/16" wrench Read More Read Less

The Top Load Washing Machine Balance Spring Kit, Set of 3 keeps the weight of the wash tub balanced. If the end of the spring rusts and your tub sits off balance, this part ma ...y need to be replaced. To access this part, you'll first need to remove the control panel of the washer. Usually held in place by two screws, some washer models have trim covers that need to be removed before gaining access to the screws. You'll only use one spring from this kit of three depending on the color label on your motor. Replacing this part will require basic hand tools, some disassembly of the combination washer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washing Machine Balance Spring Kit, Set of 3• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Refrigerator Shelf Support Stud, white, replaces the broken shelf support post in the refrigerator and freezer compartments. This kit includes two studs, one is a push and ... turn stud and one is a screw in stud. To remove the wall supports, turn them 90 degrees clockwise. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Shelf Support Stud, white• Tools Needed: Multi screwdriver, 5/8" wrench Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Whirlpool KitchenAid Roper Amana Jenn-Air Maytag Gaffers and Sattler Magic Chef Sears Kenmore Admiral Dishwasher ERC ELECTRONIC CONTROL BOARD 8531262Please Note: There is a Fa ...ctory Core Charge that is collected at time of purchase and refunded when the old part is returned to us, per the manufacturer.We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs. Read More Read Less

The SxS Refrigerator Door Shelf Trim End Cap snaps into place onto the end of your refrigerator's door rail that holds items in the door shelf. Simply pull out the door rail a ...nd slide out the old end cap from the rail to replace. This part is made of white plastic and is sold individually. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Door Shelf Trim End Cap• Tools Needed: Multi screwdriver Read More Read Less