Roper Appliance Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Whirlpool W11567348 CNTRL-ELEC+CORE i. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Refrigerator Defrost Thermostat is a safety device that clips onto the evaporator in the freezer. The thermostat turns off the defrost heater in case it gets too warm in ...the freezer section. If your refrigerator does not defrost, replacing the thermostat may alleviate this issue. To access the part, open the freezer door and remove the shelves, mounting brackets (if they release), and the ice bucket. After you remove the back panel, the defrost thermostat is mounted to the end of the evaporator. Replacing the element will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Defrost Thermostat• Tools Needed: Multi screwdriver, wire splicing tool Read More Read Less

The Whirlpool W11034363 PANEL-UI+CORE is a perfect addition to your kitchen. This stylish control panel provides efficient operation of your range, using intuitive buttons and ... knobs for easy control. The sleek design of the control panel fits with any décor and adds a touch of sophistication to your kitchen. This control panel comes with an LED digital display for reliable feedback that shows the time, temperature and other settings. With its electronic ignition, you can easily light up your range with the push of a button. It also has a temperature sensor that automatically adjusts the heat levels for consistent cooking results. This quality Whirlpool product is designed to last for years and will be sure to help make your kitchen a great place to cook. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Rear Dryer Drum Felt Seal is what seals the hot air into the dryer drum as it rotates. If hot air is leaking out of your dryer, the seal may be worn causing your dryer to ... take longer to dry your clothes. If the seal is sagging, it could pinch and mark your clothes. This seal is compatible with many different models and fits the rear drum. Includes 1 seal and adhesive to install. Replacing this part will require basic hand tools, disassembly of the dryer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Felt Drum Seal• Tools Needed: Multi screwdriver, putty knife, 5/16" nut driver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Range Element Receptacle and Wire Kit connects the surface elements of your range to the wiring harness. This kit includes (2) brackets (you'll only use one that matches ...your receptacle),(2) wires, (2) wire nuts, (2) pieces of heat-shrink wrap, and the receptacle. If your element is not heating, the connections may have shorted out. To access the part, remove the element that isn't working properly from your range, and the drip pan. Lift the top of the range and unscrew the old receptacle block. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Wire Splicing Tool, 8-1/4". This stripper specializes in stripping and cutting wire. This tool is designed with a lean nose for pulling and looping wire and equipped with precision ground cutters.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Element Receptacle and Wire Kit• Tools Needed: Multi screwdriver, wire strippers, heat gun Read More Read Less

The SxS Refrigerator Water Inlet Valve Assembly allows water to enter the refrigerator’s water dispenser and ice maker. If one of the solenoids in the original unit is bad, ...it will prevent water from flowing into the ice maker and dispenser. If the icemaker of your appliance stops making ice, no water flows from the dispenser or it flows constantly, or if you notice water at the bottom of the fresh food compartment, the water inlet valve could be malfunctioning and need to be replaced. This assembly includes (1), water inlet valve, (1) piece of plastic tubing, (1) plastic union and installation instructions. Installing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin. Helpful Tips:The replacement part may look different than the original in your appliance, but the part will still function the same. We do not recommend disassembling your appliance’s current water inlet valve to clean it due to the risk of failure after the repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Water Inlet Valve Assembly• Tools Needed: Multi screwdriver, 1/2" wrench Read More Read Less