Norge Appliance Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Ductless Downdraft Vent Kit, Black can be used when venting your appliance where venting to the outside is either not possible or not desirable in the kitchen. This kit c ...ontains a filter housing that attaches to the blower under the unit; the filter cleans the air before it re-enters the home. This accessory can be used with several brands; check to see if your model number is compatible. Measures approximately 20"L x 13"W x 12"H. Installing this accessory will require basic hand tools and novice repair experience. Remember to turn off the appropriate circuit breaker before installing this part. Helpful Tip: Change the filter every 6 months or when a loss of airflow can be detected. (Filter Part number W10177003)Part Specification•  This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  Package contains (1) Ductless Downdraft Vent Kit, Black•  No tools required for installation Read More Read Less

This Gas Range Spark Module creates the spark for lighting the gas for the range's surface burners. To access the part, you’ll need to remove the large panel on the rear of ...the range's console. Note that transferring the wires from the old part to the new part one at a time will help prevent incorrect installation. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Also make sure to turn the gas valve off before the repair.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Gas Range Surface Burner Spark Module•  Tools Needed: Multi screwdriver Read More Read Less

Vent damper works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of microwaves.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Range Surface Burner Spark Module produces sparks that ignite the top gas burners on your range. If one or more of your top burners won't spark, replacing the module may ...alleviate this issue. This kit includes the (1) module, (1) mounting bracket, (2) connectors, (1) Phillips screw. The terminals supplied should not be used if they are different in size than the current terminals. To access the part, you'll remove the back panel of your range. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you shut off the gas to the range.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Range Surface Burner Spark Module Kit•  Tools Needed: Multi screwdriver, needle nose pliers, 1/4" nut driver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

CHIMNEY

The Top Load Washer Pump Belt is located between the motor pulley and and the pump pulley, and drives the pump in your washer. If your washer does not spin or drain water prop ...erly, replacing this part may alleviate these issues. You'll need to remove the front panel of your washing machine to access the old belt using a phillips screwdriver. When tipping the washer back to access the belt, be sure to support the appliance with a piece of wood so it remains steady. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Top Load Washer Pump Belt•  Tools Needed: Multi screwdriver Read More Read Less