Maytag Appliance Parts

This Dishwasher Screw is used to secure the kickplate to the front of the appliance. This black metal screw measures 1/2" L and is specifically designed to be used with black ...appliances. Note that you will need (2) screws to secure the kickplate to the front of the appliance; each screw is sold separately. Using this part will require basic hand tool and novice repair experience. You must unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Screw• Tools Needed: Multi screwdriver Read More Read Less

Condenser fan blade, 40% works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of fridges.

This Front Load Washer Water Inlet Valve lets the hot and cold water into your washing machine and distributes it around to the dispensers. If the current valve is leaking wat ...er on the floor or the solenoids are damaged, replacing this part may alleviate these issues. Usually, a long or slow fill cycle is often due to a restricted water valve. Please note: The valve should never be disassembled and cleaned, only replaced. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Washer Water Inlet Valve• Tools Needed: Multi screwdriver, putty knife, pliers Read More Read Less

WPW10143586 is an original equipment manufactured (OEM) part. Ensure the optimal performance of your dishwasher with this high-quality dispenser switch, designed specifically ...for Whirlpool models and compatible with a range of other trusted brands including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper. This genuine replacement part, with SKU WPW10143586, guarantees a precise fit and reliable operation, restoring your appliance's functionality. Manufactured by Whirlpool, this dispenser switch is engineered for durability and efficiency, making it an essential addition to your dishwasher maintenance toolkit. With simple installation and compatibility with multiple brands, this switch helps you keep your kitchen running smoothly and efficiently. Maintain your dishwasher today for enhanced performance! Read More Read Less

Whirlpool W11550898 BEZEL i We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!

Whirlpool WP697813 SEALING We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!

The Electric Range Bake Element keeps your oven heating properly. The element is fastened into the back of the oven by two screws. Screws are not included. The main reason for ... replacing the heating element is if it has shorted out and is no longer heating the oven sufficiently. This bake element has 21" wide wire terminals. Terminal depth is 3" and the total element length is 21". Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: Be mindful not to let the wires connected to the current part fall back inside the oven when you disconnect them; retrieval of the wires will require addition steps during installation, including removal of the rear panel of the appliance.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Electric Range Bake Element• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Electric Range Coil Surface Element is a 8" Diameter,5-turn delta base heating element with looped terminal ends. This element features easy-to-install “plug in” style ... terminals and is compatible with many electric oven makes and models. If your stove's burner no longer heats up, replacing this part may alleviate the issue. Elements are sold separately. This part has been replaced by W10823719. Installing this part will require no tools, disassembly or repair experience. Remember to unplug the range or shut off the house circuit breaker for the appliance before installing this part. Recommended Items: If the range's terminals are corroded, you can replace them with the Element Receptacle and Wire Kit (item 12001676). Chrome Burner Drip Bowls (item 715878) are available if the ones on your range need to be replaced.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Electric Range Coil Surface Element• No tools required for installation Read More Read Less

This Washer Drain Hose Extension Kit is used to extend your washing machine drain hose approximately 4-ft, and will be needed if more than the standard distance exists between ... the washer and the drain. This is an accessory drain hose that is compatible with several washing machine brands; check your model number to confirm compatibility. Installing this accessory will require basic hand tools and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Recommended Item: Hose Connector (item 285835) Washing machine drain hose extension connector kit, connects the extension to the existing drain hose.Part Specification• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a universal accessory item compatible with several brands• Package contains (1) Washer Drain Hose Extension Kit• Tools Needed: Standard pliers Read More Read Less