Maytag Appliance Parts

This Refrigerator Defrost Thermostat is a safety device that clips onto the evaporator inside the freezer. The Defrost Thermostat turns off the defrost heater in case it gets ...too warm in the freezer section. To access the part, you'll have to remove all shelving, bins, rails, and mounting clips from the inside of your freezer so you can access the back panel. Remove the back panel by removing the screws. Remove the light bulb cover and then lift out the back panel. Replacing the element will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Temperature Control Thermostat (item WP4-83053-001): This thermostat sends power to the refrigerant system to keep the unit consistently cooled.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Defrost Thermostat• Tools Needed: Multi screwdriver, wire splicing tool Read More Read Less

This Dryer Front Bearing and Felt Seal is located on the outside edge of the rear of the dryer drum. If your dryer is making an unusual noise during operation, the dryer drum ...won't spin, if it takes too long to dry your clothes, or if the dryer drum isn't producing enough heat, replacing this part may alleviate the issues. No adhesive is required for this updated design that stretches to fit the drum. Note that the seal does not include plastic retainers; reuse the old retainers from the existing part. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Front Bearing and Felt Seal• Tools Needed: Multi screwdriver, putty knife Read More Read Less

The Front Load Dryer Lint Screen is a white screen that provides proper air flow and operation of your dryer. After pulling the old filter out, be sure to clean the channels o ...f the lint housing before inserting the new lint screen.The filter should be cleaned before every load of laundry and replaced immediately if damaged. This a replacement lint filter with handle measures approximately 3/8" thick on the left side and 5/8" thick on the right side. Replacing your dryer’s lint filter is a quick and essential way to keep your appliance operating at optimal levels. Installing this part requires no tools, disassembly or repair experience. Recommended Tool: The Cleaning Brush (item 4210463RW) is useful to remove lint and other debris from the dryer’s venting.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Dryer Lint Screen• No tools required for installation Read More Read Less

The Top Load Washer Balance Ring allows for smooth operation and prevents your washer from knocking or walking. It is attached to the inner clothes basket and allows the baske ...t to spin smoothly if an uneven load creates an out-of-balance situation. You'll remove the cabinet from the washing machine to access the balance ring. Replacing this part will require basic hand tools, some disassembly of the combination washer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Balance Ring• Tools Needed: Multi screwdriver Read More Read Less

W11412299 is an original equipment manufactured (OEM) part. Ensure the reliable performance of your dishwasher with this essential door latch. Designed specifically for compat ...ibility with various brands including Whirlpool, Admiral, Amana, and more, this component guarantees a secure closure, preventing leaks and enhancing safety during operation. Made from high-quality materials, it offers durability and long-lasting functionality. This part is easy to install, making it a practical solution for anyone looking to maintain their appliance's efficiency. Whether you’re upgrading your current latch or replacing a worn-out part, this door latch is a perfect choice for ensuring your dishwasher operates smoothly. Enhance your kitchen experience with a dependable component crafted for optimal performance. Read More Read Less

The Bottom Freezer Refrigerator Drawer Support End Cap snaps into place on the appliance’s pantry drawer to help contain the items inside. Note that your pantry drawer has t ...wo end caps (sold separately); this part is designed specifically to be used on the left side (from the point of view of looking into the appliance). This item is constructed of durable white plastic and can be used to easily replace a broken or missing part. Installation will not require tools or repair experience, but does involve minor disassembly of the refrigerator. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: Also consider replacing the right-hand Drawer Support End Cap (item WPW10121977) at the same time that you install this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Bottom Freezer Refrigerator Drawer Support End Cap, Left Side• No tools required for installation Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Range Grease Filter traps grease from the exhaust air of your cooktop and range to prevent it from entering the blower and vent, potentially causing build-up and damage. ...If your current filter can no longer be cleaned and is not functioning properly,replacing this part may alleviate the issue. This part measures 12" L x 5-1/2" W. Replacing this part will require basic hand tools, but no disassembly or previous repair experience.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Grease Filter• Tools Needed: Multi screwdriver Read More Read Less