Maytag Appliance Parts

The Electric Range Terminal Block is located on the back of your range where the power cord attaches to the appliance. If your appliance is no longer receiving power, replacin ...g this part may alleviate the issue. Note: This part does not include the power cord or mounting hardware. Installing this kit will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: Consider replacing your appliance’s power cord (item PT220) at the same time you make this repair. You may also need the mounting hardware (item WP488130).Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Electric Range Terminal Block• Tools Needed: Multi screwdriver Read More Read Less

The Refrigerator Deli Drawer is a clear plastic replacement part with a molded handle for your refrigerator and holds meats, vegetables and snacks in the fresh food compartmen ...t. The drawer slides into the bottom of the fresh food section to hold your items and will require no disassembly or repair experience to replace. The drawer measures approximately 20"L x 11-3/4"W x 18"H.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Deli Drawer• No tools required for installation Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Electric Range Coil Surface Element is a 5-turn, 8" D, 2600-W plug-in style heating element. If the surface burner of your appliance no longer heats up, you may be able to ... alleviate the issue by replacing this part. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Recommended Items: If the element's terminals are corroded, you can replace them with the Element Receptacle and Wire Kit (item 330031). If more than one of your appliance’s elements are no longer working, consider purchasing the complete Coil Surface Element Kit (item 4392061). If needed, the matching 6" element (item WP660532) is also sold separately. If the stainless-steel Burner Drip Bowls of your appliance are discolored or dented, you can replace them with item W10278125.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Electric Range Coil Surface Element• Tools Needed: Multi screwdriver Read More Read Less

The Ice Maker Fill Tube and Water Line Assembly connects the water inlet valve to the ice maker. If your refrigerator's ice maker is leaking water and no longer making ice, re ...placing this part may alleviate the issue. To access the part, remove the shelves from the right side of your refrigerator. The fill tube is located behind a secure panel on the back wall and runs to the top of the refrigerator. Once you disconnect the fill tube from the water inlet valve behind this panel, you can remove it through a panel at the top of the refrigerator. Installing this part will require basic tools, considerable disassembly of the refrigerator and prior repair experience. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Ice Maker Fill Tube and Water Line Assembly• Tools Needed: Flat head screwdriver Read More Read Less

This Range Door Handle, White creates a sleek, customized look for your appliance. This handle is constructed of white plastic and can be used to replace your oven’s current ... handle. Replacing this part will require no disassembly or repair experience. Make sure you unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Door Handle, White• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This SxS Refrigerator Defrost Thermostat is a safety device that clips onto the evaporator in the freezer. The Defrost Thermostat turns off the defrost heater in case it gets ...too warm in the freezer section. If your refrigerator does not defrost, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Required Accessories: You will need two wire nuts to complete this repair. Helpful Tip: Take a digital photo of the shelf side rails before removing to aid with reinstallation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Defrost Thermostat• Tools Needed: Multi screwdriver, needle-nose pliers, wire-splicing tool Read More Read Less

W11462455 is an original equipment manufactured (OEM) part. Maintain your dishwasher with the W11462455 Pump Base, a reliable replacement part designed for optimal performance .... This durable component ensures efficient water circulation and drainage, maintaining your appliance's functionality and longevity. Compatible with a variety of leading brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper, this pump base is an essential part for your dishwasher repair or maintenance needs. Crafted with high-quality materials, it provides a seamless fit and easy installation, making it an ideal choice for both DIY enthusiasts and professional technicians. Ensure your dishwasher operates smoothly and effectively with this essential pump base replacement. Read More Read Less