Maytag Appliance Parts

The Refrigerator Crisper Drawer is a durable plastic bin that’s designed to keep fruits and vegetables at their best for as long as possible. This replacement drawer is whit ...e and features a convenient pull handle. Installation requires no tools, disassembly or repair experience.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Crisper Drawer• No tools required for installation Read More Read Less

This Top Load Washer Leveling Leg is a white plastic part that allows your appliance to sit perfectly flat. Install the new leveling leg and test to see if you have it adjuste ...d properly by putting the appliance on all four legs. Adjust the new part in or out as required if your washer is unsteady. Note that you may need assistance tilting and balancing the appliance while completing this repair. Transfer the locking nut from the current leveling leg onto the new item before installation. Replacing this part will not require any tools, disassembly or repair experience. Recommended Accessory: You may need a new locking nut (item WP3359452) to complete this repair if the one on the appliance’s current leveling leg is rusted to the part and cannot to be removed. Helpful Tip: We recommend checking the other three leveling legs on your appliance in case they are also damaged or worn and require replacement. We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Leveling Leg• No tools required for installation Read More Read Less

The SxS Refrigerator Water Inlet Valve allows water to enter the refrigerator’s water dispenser and ice maker. The package includes a new water valve, instructions, ¼" tubi ...ng and a plastic union. Remove the cardboard back from the bottom of the refrigerator to access this part and remove the copper tubing. Place a towel down to catch any dripping water. The old valve has screw on compression fittings, whereas the new valve has press and lock fittings. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also, be sure to turn off the refrigerator’s water supply. Helpful Tip: Some refrigerator models also require a separate connection fitting (Tubing Coupler, item 2119001).Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Water Inlet Valve• Tools Needed: Multi screwdriver, 1/2" wrench and nut driver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This SxS Refrigerator Ice Dispenser Solenoid shifts the ice container deflector to dispense crushed ice or cubed ice. In order to access the part, open the freezer door and re ...move the ice bucket from the freezer by lifting it up and pulling it out. Remove the four screws from the panel below the ice bucket and release the wire harness to remove the assembly out of the freezer. Disconnect the wires from the solenoid and remove the two screws holding the old solenoid into the housing. This kit includes the solenoid, the arm assembly, and two mounting screws. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Also, make sure to turn the water source to the refrigerator completely off before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Ice Dispenser Solenoid• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Dishwasher Drain Hose is an extra long 12-ft hose used in cases where the sink drain is too far away from your dishwasher for a standard hose. When replacing, make sure t ...o use towels to catch any water that might leak out of the line. Also be sure that the sink end of the hose is the correct size - you can cut down a larger sink end if necessary before attaching. This accessory can be used across several brands; check to see if your model number is compatible. Replacing this accessory will require basic hand tools, some disassembly of the dishwasher and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn the water supply off to the dishwasher. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner* (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a universal accessory item compatible with several brands• Package contains (1) Dishwasher Drain Hose• Tools Needed: Multi screwdriver Read More Read Less

W11544456 is an original equipment manufactured (OEM) part. Maintain your microwave's performance with this reliable circuit board assembly, designed specifically to enhance t ...he functionality of Whirlpool and compatible brands. This component serves as the timer and overlay for an efficient cooking experience, ensuring precise timing for your culinary creations. Crafted with durability in mind, it seamlessly fits models from top brands like Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper. Installing this part can restore your microwave to optimal efficiency, saving both time and energy in the kitchen. Whether you're replacing a malfunctioning board or upgrading an old unit, this assembly guarantees quality and compatibility. Elevate your cooking experience with this indispensable microwave part. Read More Read Less

Interlock cam plate works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of microwaves.