Maytag Appliance Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Maintain the efficiency and functionality of your cooking appliance with this high-quality gas burner cap. Designed for a variety of compatible brands, including Admiral, Aman ...a, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool, this part ensures a secure fit and optimal performance. Manufactured by Whirlpool, it meets strict quality standards, helping you maintain your range with confidence. Whether you’re replacing a worn-out part or completing a repair, this burner cap is essential for even heat distribution, enhancing your cooking experience. Keep your kitchen running smoothly with this reliable replacement, designed specifically for your cooking needs. Maintain today and enjoy consistent results in your culinary endeavors. Read More Read Less

This Electric Range Oven Broil Element is a replacement part with 1/4" push-on wire terminals that provides constant heat to the broiler when cooking. If your broiler does not ... heat up properly, replacing this part may alleviate the issue. Reuse the existing support bracket for the element if your oven has one when installing this part. Replacing the element will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: Be mindful not to let the wires connected to the current part fall back inside the oven when you disconnect them; retrieval of the wires will require addition steps during installation, including removal of the rear panel of the appliance.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Electric Range Oven Broil Element• Tools Needed: Multi screwdriver Read More Read Less

The Dryer Felt Seal encloses the drum in the appliance to prevent air from escaping during the drying cycle. If the seal in your dryer is worn out or damaged, you may notice t ...hat your dryer does not tumble properly. As the felt seal wears out and compresses over time, it can also cause hot air to escape the drum, making the drying cycle noisy and less effective. Required Accessory: You will need High Temperature Adhesive (item WPY055980) to complete this repair. Installing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Felt Seal• Tools Needed: Multi screwdriver, needle-nose pliers Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Top Load Washer Water Inlet Valve Assembly lets the hot and cold water into your washing machine and distributes it around to the dispensers. If the valve is leaking or t ...he solenoids are damaged, this part will need to be replaced. Usually, a long or slow fill cycle is often due to a restricted water valve. Please note: The valve should never be disassembled and cleaned, only replaced. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn the water supply off to the water and place a towel down when removing the hot and cold fill hoses from the valve. Recommended Item: 10" V-Jaw Tongue & Groove Pliers (item 3527544) V-Jaw increases the number of contact points on the jaw to create a stronger grip. Helpful tip: Consider replacing the old fill hose when installing a new valve (item 1178857).Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Washer Water Inlet Valve• Tools Needed: Multi screwdriver, 10" V-Jaw Tongue & Groove Pliers, tape, putty knife, standard pliers, nylon lanyard Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

W11546610 is an original equipment manufactured (OEM) part. Ensure your refrigerator operates efficiently with this essential heating element, designed specifically for a vari ...ety of popular brands. This part is a reliable solution for maintaining optimal performance in your appliance while preventing frost buildup that can disrupt cooling. Made by Whirlpool, this heating element is compatible with Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool refrigerators, making it a versatile choice for many models. Easy to install and built to last, it helps prolong the lifespan of your refrigerator, ensuring your food stays fresh and safe. Maintain your appliance with this high-quality heating element, and enjoy peace of mind knowing your refrigerator is equipped for reliable operation. Trust in a name known for quality and innovation in home appliances. Read More Read Less

W11542161-includeCORE is an original equipment manufactured (OEM) part. Enhance the performance of your washing machine with the Whirlpool electronic control board and core as ...sembly. This essential component plays a critical role in regulating your washer's operations, ensuring optimal cycle performance and efficiency. Designed for compatibility with various brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper, this part is ideal for a wide range of models. With a straightforward installation process, you'll find it easy to replace your old or malfunctioning control board and bring your washer back to life. Rely on the durability and quality of Whirlpool products to maintain your appliance's reliability. Maintain your washer today and experience seamless laundry care without the hassle. Read More Read Less

The Dishwasher Water Level Switch shuts the water fill valve off if the water level gets too high before the timed fill cycle ends. To access the part, remove the retainers wi ...th a flat head screwdriver and remove the bottom access panel. The Water Level Switch is located on the right hand side of your dishwasher. Replacing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. You must unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Water Level Switch• Tools Needed: Multi screwdriver Read More Read Less