Magic Chef Appliance Parts Dryer Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The White Dryer Door Handle is a replacement part for a damaged handle on your dryer door. If the existing handle is cracked or broken or not working properly, you can easily ...replace it with this part. To access the handle, remove the door from its hinges with a screwdriver and remove the rest of the screws. Take the two door halves apart so you can slide the new part into the handle hold; then lock it into place with the tab. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Door Handle, White• Tools Needed: Multi screwdriver Read More Read Less

This Dryer Telescoping Vent Periscope measures up to 18"L and is designed for use in small laundry spaces with 2-1/2" clearance. It features one male snap-lock fitting and one ... extra long draw-band collar for easy installation; excess length can be trimmed to fit. The beveled ends of the item prevent interference with or damage to floors and wall. This product is a universal accessory item compatible with several brands; check to see if your model number is compatible. Installing this accessory will require no disassembly or repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing.Part Specification• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• Package contains (1) Dryer Telescoping Vent Periscope• Tools Needed: Multi screwdriver Read More Read Less

This Top Load Washer Agitator Repair Kit is designed for use with select compatible washing machines. If the top part of the agitator is not moving properly in your appliance ...but the bottom still functions correctly, replacing this part may alleviate the issue. This repair kit includes (4) agitator dogs, (1) medium length cam, (1) cap seal, (1) washer for the agitator bolt and (1) thrust washer. We recommend using a small amount of grease (item 350849) with this kit if no grease is present on the old thrust washer. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation. Recommended Item: Also consider replacing the bolt (item 539455) and getting a spare set of dog ears (item 3109). The bolt can get corroded and the dog ears wear out over time.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Washer Agitator Repair Kit• Tools Needed: Flat-blade screwdriver, 7/16 in. socket with long extension Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Heating Element Wire Connector may need to be replaced if your dryer takes too long to dry your clothes or if your dryer is no longer producing heat. To start this r ...epair, pull the dryer away from the wall to access the back panel and remove the 9 screws holding the panel in place. Remove the wire from the heating block terminal and use your wire cutters to cut off the end of the wire near the terminal. The remove about a 1/4" of insulation from the end of the wire. Then you'll connect the new wire with the new nut to the existing wire. This kit Includes (1) wire with terminal and (1) wire nut. (2) ire connectors. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Wire Splicing Tool: 8-1/4". This stripper specializes in stripping and cutting wire. This tool is designed with a lean nose for pulling and looping wire and equipped with precision ground cutters.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• Package contains (1) Dryer Heating Element Wire Connector Kit• Tools Needed: 1/4" nut driver, wire splicing tool, wire cutters Read More Read Less

The Dryer High Limit Thermostat is a safety device that cuts off the power to the heating element if the appliance begins to overheat. The only difference between the high lim ...it thermostat and the operating thermostat is their opening and closing temperatures. If your dryer won’t heat, this part might be defective and should be replaced. Installing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: The replacement part may look different than the original in your appliance, but the part will still install and work the same. A power screwdriver is helpful when making this repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer High Limit Thermostat• Tools Needed: Multi screwdriver Read More Read Less

This Top Load Washer Agitator Assembly spins and agitates your clothes properly so they can be washed. The agitator is located in the center of the wash drum and is secured by ... (1) bolt with washer at its base. To secure the bolt into the new agitator before installing, turn the agitator upside down and put the new bolt in position. This assembly includes both the upper and lower parts of the agitator. Replacing this part will require basic tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Recommended Items: Consider replacing the Fabric Softener Dispenser (item WP63594) at the same time you complete this repair. We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Agitator Assembly• Tools Needed: Flat-blade screwdriver and socket with long extension Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Top Load Washer Agitator Cam Repair Kit should be used if the upper section of the agitator isn't turning properly. This repair kit includes (4) directional cogs (or dog ...ears) and (1) cam. Pre-assemble the repair kit before installing in the agitator. Make sure you install the dog ears with the curve of the cam. We recommend using a small amount of grease (item 350849) with this kit if no grease is present on the old thrust washer. Replacing this part will require basic tools, some disassembly of the washing machine and novice repair experience. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Agitator Cam Repair Kit• Tools Needed: Multi screwdriver, 7/16" socket Read More Read Less