Estate

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Electric Range Coil Surface Element is a 6" D heating element with looped terminal ends. This 1250W element features “plug in” style terminals and is compatible with m ...any electric range makes and models. If your element no longer heats up, replacing this part may alleviate the issue. Elements are sold separately. Installing this part will require no tools, disassembly or repair experience. Remember to unplug the range or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Electric Range Coil Surface Element• No tools required for installation Read More Read Less

The Top Freezer Refrigerator Temperature Control Thermostat sends power to the refrigerant system to keep the unit consistently cooled. If your refrigerator isn’t maintainin ...g a constant temperature, is becoming too cold or the fan is running continuously, this part may need to be replaced. Installing this part will require basic tools, some disassembly of the refrigerator and novice repair experience. Remember to unplug refrigerator or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Consider replacing the appliance’s thermometer (item 8171720) at the same time you complete this repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Freezer Refrigerator Temperature Control Thermostat• Tools Needed: Multi screwdriver Read More Read Less

This Dishwasher Pump Impeller Kit is a rebuild for the pump in your dishwasher. If your pump is damaged and you aren't getting any water pressure, or the water seal is damaged ... and water is draining outside of the dishwasher, this part may need to be replaced. Remove the lower rack of your dishwasher and take out the spray arm nut by turning it counter-clockwise to access the part. When removing the old gasket, be sure to clean out any left behind residue. This kit includes the drain & wash impeller, pump seal, chopper, spacer, water seal, spring, hold down bolt, and instruction sheet.Replacing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. You must unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the dishwasher's hot and cold water supplies underneath the sink.Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Pump Impeller Kit• Tools Needed: Multi screwdriver, torque 15 driver, adjustable wrench, 1/4" nut driver Read More Read Less

The Dishwasher Water Inlet Valve allows the appliance to fill with water and complete the cleaning cycle. If your dishwasher won't fill properly or overflows and leaks water o ...n the floor, then the water valve may be restricted or damaged and will need replacement. Note that if the dishwasher is underfilling, it will most likely exhibit poor wash performance. Installing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn off the water supply before you begin. Required Accessory: You will need to reuse the brass fitting from the existing part with the new valve or purchase a new one (item W10685193) if the old one doesn’t fit; use pipe joint compound to securely attach the fitting to the new part. Recommended Item: The Dishwasher Drain Pan (item 1021760) slides underneath the appliance and diverts any water leak to the front of the dishwasher.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Water Inlet Valve• Tools Needed: Multi screwdriver, 5/8" wrench Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Electric Range Surface Control Knob allows you to adjust the heating level of your electric cooktop surface burner. This knob is constructed of black plastic and measures ...approximately 2-in D. Remove the old knob by pulling it straight off its post. Replacing this part will require no disassembly or repair experience.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Electric Range Surface Control Knob, Black• No tools required for installation Read More Read Less

This Top Load Washer Bearing Replacement Tool Kit is needed to repair install the bearing, shaft, and seal kit. Which is used on Whirlpool® and Kenmore® washing machines. Wh ...en replacing this part, if you see that your motor stator is broken, check your model number to confirm compatibility. Please remember to unplug the washer or shut off the breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Tub Bearing and Drive Shaft Kit• Tools Needed: Specialized Tools Read More Read Less

This SxS Refrigerator Door Gasket is on the inner door panel of your freezer and creates a seal around the door to prevent warm air from entering the refrigerator. If this gas ...ket is worn out, cold air will leak out of the freezer. As a result, the freezer may run longer in an attempt to cool down, or frost may accumulate. Replacing it may alleviate these issues. This gasket is black and designed to be used with compatible side-by-side refrigerators. To remove any creases or wrinkles from the new gasket, set it in the sun or hot water for a few minutes. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing. Also turn off the refrigerator's water supply before you begin.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Door Gasket• Tools Needed: Multi screwdriver Read More Read Less

This high-quality control knob is designed specifically for Whirlpool dryers, ensuring seamless compatibility and functionality. Crafted for longevity, it serves as a reliable ... replacement for your worn or broken knob, restoring full control over your drying settings. The versatile design also fits various compatible brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper. Installation is straightforward, making it easy for you to Maintain your appliance's performance without professional help. Don’t let a faulty knob disrupt your laundry routine; Maintain to this durable control knob and enjoy the convenience of precise settings with every load. Perfect for households looking to maintain their dryer’s efficiency. Read More Read Less