10012733 Bosch Refrigerator Fixture

Replacing the Bosch 10012733 FIXTURE

Step 1: Remove the power to the circuit breaker and turn off the light switch.

Step 2: Unscrew the bulbs from the broken Bosch 10012733 fixture and set aside until you’re ready to replace them.

Step 3: Remove the mounting screws that attach the old fixture to the wall or ceiling, and then pull the fixture away carefully.

Step 4: Carefully unwire the old fixture and make a note of which wires go where.

Step 5: Install the new Bosch 10012733 fixture in its place and wire it according to the manufacturer's instructions.

Step 6: Secure the new fixture with the mounting screws you removed from the old one.

Step 7: Replace the bulbs with the ones from the old fixture.

Step 8: Turn the power back on to the circuit breaker and switch on the light switch to test the new fixture.

Step 9: Enjoy the new look of your Bosch 10012733 fixture!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.