00754866 Bosch Dishwasher Spring Repair Set

Instructions on Replacing a Bosch Dishwasher Door Spring Kit (00754866)

1. Before beginning the replacement, turn off the power to the dishwasher at the circuit breaker.

2. Open the door of the dishwasher and locate the door spring. The door spring is usually attached to the front side of the dishwasher door with two screws or bolts.

3. Use a screwdriver or wrench to remove the screws or bolts from the door spring.

4. Carefully detach the old door spring from the door.

5. Remove the new door spring kit (model 00754866) from its packaging.

6. Line up the holes on the new door spring with the ones in the dishwasher door.

7. Attach the new door spring to the door with the included screws or bolts.

8. Turn on the power to the dishwasher at the circuit breaker.

9. Test the dishwasher door to make sure the new spring is working properly.

10. Enjoy your freshly installed Bosch dishwasher door spring kit!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.