00611151 Bosch Tray Assembly

Replacing the 00611151 Bosch Drip Tray with Grill

Tools you will need:

-Phillips head screwdriver

-Flat-head screwdriver

-Pliers

Step 1: Before beginning, make sure to turn off and unplug the appliance from its power sources.

Step 2: Remove the screws that hold the old drip tray in place using the Phillips head screwdriver.

Step 3: Take out the old drip tray and dispose of it appropriately.

Step 4: Place the new drip tray with grill in the desired location and secure it to the bottom of the appliance with the Phillips head screws.

Step 5: Tighten the screws with the Phillips head screwdriver.

Step 6: Reattach the plumbing by following the instructions on the packaging.

Step 7: Test the integrity of the grill by pouring a small amount of water on it to ensure it is properly secured and leak free.

Step 8: Turn the appliance back on and check that it is working properly.

Your Bosch 00611151 drip tray with grill has now been replaced.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.