L14000166 American Vulkan Lokring 120 Degree Tube Cutter

1. Gather the necessary tools and materials for the job. You will need a new American Vulkan Lokring L14000166 120 DEG. TUBE CUTTER, a pipe wrench, and a small flat-head screwdriver.

2. Disconnect the power supply to the tube cutter before beginning work.

3. Use the pipe wrench to loosen the nut and fitting on the existing tube cutter. Remove the nut, fitting and existing tube cutter from the area you are working in.

4. Install the new American Vulkan Lokring L14000166 120 DEG. TUBE CUTTER in the same position as the old one that was removed.

5. Secure the new tube cutter with the pipe wrench. Make sure the nut is tightened enough to keep the tube secure and doesn’t move.

6. Place the new tube in the cutting machine and ensure it is aligned properly with the blade.

7. Turn the machine on and make sure it operates correctly.

8. If all is functioning well, use the small screwdriver to secure any necessary screws and bolts on the tube cutter.

9. Test the newly installed American Vulkan Lokring L14000166 120 DEG. TUBE CUTTER one more time before using it to cut metal pipes.

10. Disconnect the power supply before carrying out any maintenance work on the tube cutter.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.